Browse Source

new autonetkit version

master
Sebastian Rieger 9 years ago
parent
commit
69df6da303
  1. 660
      GIT-VIRL-HS-Fulda/smb.virl

660
GIT-VIRL-HS-Fulda/smb.virl

@ -1,182 +1,205 @@
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd">
<extensions>
<entry key="management_network" type="String">exclusive</entry>
</extensions>
<node name="flat-1" type="ASSET" subtype="FLAT" location="288,78">
<interface id="0" name="link0"/>
</node>
<node name="iosv-1" type="SIMPLE" subtype="IOSv" location="397,74" ipv4="192.168.0.1">
<node name="iosv-1" type="SIMPLE" subtype="IOSv" location="397,74">
<extensions>
<entry key="config" type="string">!
! Last configuration change at 19:06:54 UTC Fri Jul 10 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname iosv-1
!
boot-start-marker
boot-end-marker
!
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
bsd-client server url https://cloudsso.cisco.com/as/token.oauth2
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
cts logging verbose
!
!
!
redundancy
!
no cdp run
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
description Loopback
ip address 192.168.0.1 255.255.255.255
!
interface GigabitEthernet0/0
description OOB Management
ip address 10.255.1.73 255.255.0.0
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
description to iosvl2-3
ip address 10.0.0.1 255.255.0.0
ip nat inside
ip virtual-reassembly in
ip ospf cost 1
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/2
description to flat-1
ip address 172.16.1.170 255.255.255.0
ip nat outside
ip nat enable
ip virtual-reassembly in
duplex auto
speed auto
media-type rj45
!
router ospf 1
passive-interface Loopback0
network 10.0.0.0 0.0.255.255 area 0
network 192.168.0.1 0.0.0.0 area 0
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip nat inside source list 1 interface GigabitEthernet0/2 overload
ip default-network 172.16.1.0
ip route 0.0.0.0 0.0.0.0 172.16.1.254
!
!
!
access-list 1 permit 10.0.0.0 0.0.255.255
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
password cisco
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
<entry key="config" type="String">!&#xD;
! Last configuration change at 21:23:40 UTC Thu Sep 3 2015&#xD;
!&#xD;
version 15.5&#xD;
service timestamps debug datetime msec&#xD;
service timestamps log datetime msec&#xD;
no service password-encryption&#xD;
!&#xD;
hostname iosv-1&#xD;
!&#xD;
boot-start-marker&#xD;
boot-end-marker&#xD;
!&#xD;
!&#xD;
vrf definition Mgmt-intf&#xD;
!&#xD;
address-family ipv4&#xD;
exit-address-family&#xD;
!&#xD;
address-family ipv6&#xD;
exit-address-family&#xD;
!&#xD;
enable password cisco&#xD;
!&#xD;
no aaa new-model&#xD;
ethernet lmi ce&#xD;
!&#xD;
!&#xD;
!&#xD;
mmi polling-interval 60&#xD;
no mmi auto-configure&#xD;
no mmi pvc&#xD;
mmi snmp-timeout 180&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
no ip domain lookup&#xD;
ip cef&#xD;
ipv6 unicast-routing&#xD;
ipv6 cef&#xD;
!&#xD;
multilink bundle-name authenticated&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
redundancy&#xD;
!&#xD;
no cdp run&#xD;
!&#xD;
! &#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
interface Loopback0&#xD;
description Loopback&#xD;
ip address 192.168.0.1 255.255.255.255&#xD;
!&#xD;
interface GigabitEthernet0/0&#xD;
description OOB Management&#xD;
vrf forwarding Mgmt-intf&#xD;
ip address 10.255.0.116 255.255.0.0&#xD;
duplex full&#xD;
speed auto&#xD;
media-type rj45&#xD;
!&#xD;
interface GigabitEthernet0/1&#xD;
description to iosvl2-3&#xD;
ip address 10.0.0.1 255.255.0.0&#xD;
ip nat inside&#xD;
ip virtual-reassembly in&#xD;
ip ospf cost 1&#xD;
duplex full&#xD;
speed auto&#xD;
media-type rj45&#xD;
!&#xD;
interface GigabitEthernet0/2&#xD;
description to flat-1&#xD;
ip address 172.16.1.89 255.255.255.0&#xD;
ip nat outside&#xD;
ip virtual-reassembly in&#xD;
duplex full&#xD;
speed auto&#xD;
media-type rj45&#xD;
!&#xD;
router ospf 1&#xD;
passive-interface Loopback0&#xD;
network 10.0.0.0 0.0.255.255 area 0&#xD;
network 192.168.0.1 0.0.0.0 area 0&#xD;
!&#xD;
ip forward-protocol nd&#xD;
!&#xD;
!&#xD;
no ip http server&#xD;
no ip http secure-server&#xD;
ip nat pool flatpool 172.16.1.89 172.16.1.89 prefix-length 30&#xD;
ip nat inside source list 1 pool flatpool overload&#xD;
ip route 0.0.0.0 0.0.0.0 172.16.1.254&#xD;
!&#xD;
!&#xD;
!&#xD;
access-list 1 permit 10.0.0.0 0.255.255.255&#xD;
!&#xD;
control-plane&#xD;
!&#xD;
banner exec `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
banner incoming `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
banner login `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
!&#xD;
line con 0&#xD;
password cisco&#xD;
line aux 0&#xD;
line vty 0 4&#xD;
exec-timeout 720 0&#xD;
password cisco&#xD;
login&#xD;
transport input telnet ssh&#xD;
!&#xD;
no scheduler allocate&#xD;
!&#xD;
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.1" netPrefixLenV4="16"/>
<interface id="1" name="GigabitEthernet0/2"/>
</node>
<node name="iosvl2-1" type="SIMPLE" subtype="IOSvL2" location="251,242">
<extensions>
<entry key="config" type="string">!
! Last configuration change at 19:03:15 UTC Fri Jul 10 2015
<entry key="config" type="string">! IOSvL2 Config generated on 2015-09-03 21:26
! by autonetkit_0.18.1
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
!
line vty 0 4
transport input ssh telnet
exec-timeout 720 0
password cisco
login
!
line con 0
password cisco
!
hostname iosvl2-1
!
@ -184,7 +207,6 @@ boot-start-marker
boot-end-marker
!
!
enable password cisco
!
no aaa new-model
!
@ -195,7 +217,6 @@ no aaa new-model
!
!
!
no ip domain-lookup
ip cef
no ipv6 cef
!
@ -205,45 +226,48 @@ spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
!
!
!
!
interface Loopback0
description Loopback
no ip address
description Loopback
!
interface GigabitEthernet0/0
description Mapped to Vlan1 for management
switchport mode access
media-type rj45
negotiation auto
description Mapped to Vlan1 for management
! Configured on launch
switchport mode access
no shutdown
!
interface GigabitEthernet0/1
description to iosvl2-3
switchport trunk encapsulation dot1q
switchport mode trunk
media-type rj45
negotiation auto
description to iosvl2-3
switchport trunk encapsulation dot1q
switchport mode trunk
no shutdown
!
interface GigabitEthernet0/2
description to server-1
switchport access vlan 2
switchport mode access
media-type rj45
negotiation auto
description to server-1
switchport access vlan 2
switchport mode access
no shutdown
!
interface Vlan1
description OOB Management
ip address 10.255.1.74 255.255.0.0
description OOB Management
! Configured on launch
vrf forwarding Mgmt-intf
no ip address
!
!
ip forward-protocol nd
!
@ -257,45 +281,10 @@ no ip http secure-server
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
password cisco
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
!
end</entry>
end
</entry>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
@ -303,14 +292,28 @@ end</entry>
</node>
<node name="iosvl2-2" type="SIMPLE" subtype="IOSvL2" location="517,242">
<extensions>
<entry key="config" type="string">!
! Last configuration change at 19:03:17 UTC Fri Jul 10 2015
<entry key="config" type="string">! IOSvL2 Config generated on 2015-09-03 21:26
! by autonetkit_0.18.1
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
!
line vty 0 4
transport input ssh telnet
exec-timeout 720 0
password cisco
login
!
line con 0
password cisco
!
hostname iosvl2-2
!
@ -318,7 +321,6 @@ boot-start-marker
boot-end-marker
!
!
enable password cisco
!
no aaa new-model
!
@ -329,7 +331,6 @@ no aaa new-model
!
!
!
no ip domain-lookup
ip cef
no ipv6 cef
!
@ -339,45 +340,48 @@ spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
!
!
!
!
interface Loopback0
description Loopback
no ip address
description Loopback
!
interface GigabitEthernet0/0
description Mapped to Vlan1 for management
switchport mode access
media-type rj45
negotiation auto
description Mapped to Vlan1 for management
! Configured on launch
switchport mode access
no shutdown
!
interface GigabitEthernet0/1
description to iosvl2-3
switchport trunk encapsulation dot1q
switchport mode trunk
media-type rj45
negotiation auto
description to iosvl2-3
switchport trunk encapsulation dot1q
switchport mode trunk
no shutdown
!
interface GigabitEthernet0/2
description to server-2
switchport access vlan 2
switchport mode access
media-type rj45
negotiation auto
description to server-2
switchport access vlan 2
switchport mode access
no shutdown
!
interface Vlan1
description OOB Management
ip address 10.255.1.75 255.255.0.0
description OOB Management
! Configured on launch
vrf forwarding Mgmt-intf
no ip address
!
!
ip forward-protocol nd
!
@ -391,45 +395,10 @@ no ip http secure-server
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
password cisco
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
!
end</entry>
end
</entry>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
@ -437,14 +406,28 @@ end</entry>
</node>
<node name="iosvl2-3" type="SIMPLE" subtype="IOSvL2" location="391,172">
<extensions>
<entry key="config" type="string">!
! Last configuration change at 19:03:21 UTC Fri Jul 10 2015
<entry key="config" type="string">! IOSvL2 Config generated on 2015-09-03 21:26
! by autonetkit_0.18.1
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
!
line vty 0 4
transport input ssh telnet
exec-timeout 720 0
password cisco
login
!
line con 0
password cisco
!
hostname iosvl2-3
!
@ -452,7 +435,6 @@ boot-start-marker
boot-end-marker
!
!
enable password cisco
!
no aaa new-model
!
@ -463,7 +445,6 @@ no aaa new-model
!
!
!
no ip domain-lookup
ip cef
no ipv6 cef
!
@ -473,52 +454,54 @@ spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
!
!
!
!
interface Loopback0
description Loopback
no ip address
description Loopback
!
interface GigabitEthernet0/0
description Mapped to Vlan1 for management
switchport mode access
media-type rj45
negotiation auto
description Mapped to Vlan1 for management
! Configured on launch
switchport mode access
no shutdown
!
interface GigabitEthernet0/1
description to iosvl2-2
switchport trunk encapsulation dot1q
switchport mode trunk
media-type rj45
negotiation auto
description to iosvl2-2
switchport trunk encapsulation dot1q
switchport mode trunk
no shutdown
!
interface GigabitEthernet0/2
description to iosvl2-1
switchport trunk encapsulation dot1q
switchport mode trunk
media-type rj45
negotiation auto
description to iosvl2-1
switchport trunk encapsulation dot1q
switchport mode trunk
no shutdown
!
interface GigabitEthernet0/3
description to iosv-1
switchport access vlan 2
switchport mode access
media-type rj45
negotiation auto
description to iosv-1
switchport access vlan 2
switchport mode access
no shutdown
!
interface Vlan1
description OOB Management
ip address 10.255.1.76 255.255.0.0
description OOB Management
! Configured on launch
vrf forwarding Mgmt-intf
no ip address
!
!
ip forward-protocol nd
!
@ -532,45 +515,10 @@ no ip http secure-server
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
password cisco
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
!
end</entry>
end
</entry>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
@ -594,7 +542,7 @@ runcmd:
- service sshd restart
users:
- default
- gecos: User configured by VIRL Configuration Engine 0.15.8
- gecos: User configured by VIRL Configuration Engine 0.18.9
lock-passwd: false
name: cisco
plain-text-passwd: cisco
@ -631,11 +579,8 @@ write_files:
content: |-
#!/bin/sh -e
ifconfig eth1 up 10.0.0.2 netmask 255.255.0.0
route add -host 192.168.0.1 gw 10.0.0.1 dev eth1
route add -net 10.0.0.0/16 gw 10.0.0.1 dev eth1
route add -net 192.168.0.0/29 gw 10.0.0.1 dev eth1
route del default
route add default gw 10.0.0.1
route del -net 10.0.0.0 netmask 255.255.0.0 gw 10.0.0.1
exit 0
</entry>
</extensions>
@ -658,7 +603,7 @@ runcmd:
- service sshd restart
users:
- default
- gecos: User configured by VIRL Configuration Engine 0.15.8
- gecos: User configured by VIRL Configuration Engine 0.18.9
lock-passwd: false
name: cisco
plain-text-passwd: cisco
@ -695,11 +640,8 @@ write_files:
content: |-
#!/bin/sh -e
ifconfig eth1 up 10.0.0.3 netmask 255.255.0.0
route add -host 192.168.0.1 gw 10.0.0.1 dev eth1
route add -net 10.0.0.0/16 gw 10.0.0.1 dev eth1
route add -net 192.168.0.0/29 gw 10.0.0.1 dev eth1
route del default
route add default gw 10.0.0.1
route del -net 10.0.0.0 netmask 255.255.0.0 gw 10.0.0.1
exit 0
</entry>
</extensions>

Loading…
Cancel
Save