diff --git a/GIT-VIRL-HS-Fulda/smb.virl b/GIT-VIRL-HS-Fulda/smb.virl index 8838b24..c1bebe5 100644 --- a/GIT-VIRL-HS-Fulda/smb.virl +++ b/GIT-VIRL-HS-Fulda/smb.virl @@ -1,182 +1,205 @@ + + exclusive + - + - ! -! Last configuration change at 19:06:54 UTC Fri Jul 10 2015 -! -version 15.5 -service timestamps debug datetime msec -service timestamps log datetime msec -no service password-encryption -! -hostname iosv-1 -! -boot-start-marker -boot-end-marker -! -! -enable password cisco -! -no aaa new-model -ethernet lmi ce -! -! -! -bsd-client server url https://cloudsso.cisco.com/as/token.oauth2 -mmi polling-interval 60 -no mmi auto-configure -no mmi pvc -mmi snmp-timeout 180 -! -! -! -! -! -! -! -! -! -! -! -no ip domain lookup -ip cef -ipv6 unicast-routing -ipv6 cef -! -multilink bundle-name authenticated -! -! -cts logging verbose -! -! -! -redundancy -! -no cdp run -! -! -! -! -! -! -! -! -! -! -! -! -! -! -interface Loopback0 - description Loopback - ip address 192.168.0.1 255.255.255.255 -! -interface GigabitEthernet0/0 - description OOB Management - ip address 10.255.1.73 255.255.0.0 - duplex auto - speed auto - media-type rj45 -! -interface GigabitEthernet0/1 - description to iosvl2-3 - ip address 10.0.0.1 255.255.0.0 - ip nat inside - ip virtual-reassembly in - ip ospf cost 1 - duplex auto - speed auto - media-type rj45 -! -interface GigabitEthernet0/2 - description to flat-1 - ip address 172.16.1.170 255.255.255.0 - ip nat outside - ip nat enable - ip virtual-reassembly in - duplex auto - speed auto - media-type rj45 -! -router ospf 1 - passive-interface Loopback0 - network 10.0.0.0 0.0.255.255 area 0 - network 192.168.0.1 0.0.0.0 area 0 -! -ip forward-protocol nd -! -! -no ip http server -no ip http secure-server -ip nat inside source list 1 interface GigabitEthernet0/2 overload -ip default-network 172.16.1.0 -ip route 0.0.0.0 0.0.0.0 172.16.1.254 -! -! -! -access-list 1 permit 10.0.0.0 0.0.255.255 -! -control-plane -! -banner exec ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner incoming ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner login ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -! -line con 0 - password cisco -line aux 0 -line vty 0 4 - exec-timeout 720 0 - password cisco - login - transport input telnet ssh -! -no scheduler allocate -! -end + ! +! Last configuration change at 21:23:40 UTC Thu Sep 3 2015 +! +version 15.5 +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +! +hostname iosv-1 +! +boot-start-marker +boot-end-marker +! +! +vrf definition Mgmt-intf + ! + address-family ipv4 + exit-address-family + ! + address-family ipv6 + exit-address-family +! +enable password cisco +! +no aaa new-model +ethernet lmi ce +! +! +! +mmi polling-interval 60 +no mmi auto-configure +no mmi pvc +mmi snmp-timeout 180 +! +! +! +! +! +! +! +! +! +! +! +no ip domain lookup +ip cef +ipv6 unicast-routing +ipv6 cef +! +multilink bundle-name authenticated +! +! +! +! +! +redundancy +! +no cdp run +! +! +! +! +! +! +! +! +! +! +! +! +! +! +interface Loopback0 + description Loopback + ip address 192.168.0.1 255.255.255.255 +! +interface GigabitEthernet0/0 + description OOB Management + vrf forwarding Mgmt-intf + ip address 10.255.0.116 255.255.0.0 + duplex full + speed auto + media-type rj45 +! +interface GigabitEthernet0/1 + description to iosvl2-3 + ip address 10.0.0.1 255.255.0.0 + ip nat inside + ip virtual-reassembly in + ip ospf cost 1 + duplex full + speed auto + media-type rj45 +! +interface GigabitEthernet0/2 + description to flat-1 + ip address 172.16.1.89 255.255.255.0 + ip nat outside + ip virtual-reassembly in + duplex full + speed auto + media-type rj45 +! +router ospf 1 + passive-interface Loopback0 + network 10.0.0.0 0.0.255.255 area 0 + network 192.168.0.1 0.0.0.0 area 0 +! +ip forward-protocol nd +! +! +no ip http server +no ip http secure-server +ip nat pool flatpool 172.16.1.89 172.16.1.89 prefix-length 30 +ip nat inside source list 1 pool flatpool overload +ip route 0.0.0.0 0.0.0.0 172.16.1.254 +! +! +! +access-list 1 permit 10.0.0.0 0.255.255.255 +! +control-plane +! +banner exec ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner incoming ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner login ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +! +line con 0 + password cisco +line aux 0 +line vty 0 4 + exec-timeout 720 0 + password cisco + login + transport input telnet ssh +! +no scheduler allocate +! +end - ! -! Last configuration change at 19:03:15 UTC Fri Jul 10 2015 + ! IOSvL2 Config generated on 2015-09-03 21:26 +! by autonetkit_0.18.1 ! version 15.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service compress-config +no service config +enable password cisco +ip classless +ip subnet-zero +no ip domain lookup +! +line vty 0 4 +transport input ssh telnet +exec-timeout 720 0 +password cisco +login +! +line con 0 +password cisco ! hostname iosvl2-1 ! @@ -184,7 +207,6 @@ boot-start-marker boot-end-marker ! ! -enable password cisco ! no aaa new-model ! @@ -195,7 +217,6 @@ no aaa new-model ! ! ! -no ip domain-lookup ip cef no ipv6 cef ! @@ -205,45 +226,48 @@ spanning-tree extend system-id ! vlan internal allocation policy ascending ! -! -! -! ! ! ! +vrf definition Mgmt-intf ! + address-family ipv4 + exit-address-family + ! + address-family ipv6 + exit-address-family ! ! ! ! ! interface Loopback0 - description Loopback - no ip address + description Loopback ! interface GigabitEthernet0/0 - description Mapped to Vlan1 for management - switchport mode access - media-type rj45 - negotiation auto + description Mapped to Vlan1 for management + ! Configured on launch + switchport mode access + no shutdown ! interface GigabitEthernet0/1 - description to iosvl2-3 - switchport trunk encapsulation dot1q - switchport mode trunk - media-type rj45 - negotiation auto + description to iosvl2-3 + switchport trunk encapsulation dot1q + switchport mode trunk + no shutdown ! interface GigabitEthernet0/2 - description to server-1 - switchport access vlan 2 - switchport mode access - media-type rj45 - negotiation auto + description to server-1 + switchport access vlan 2 + switchport mode access + no shutdown ! interface Vlan1 - description OOB Management - ip address 10.255.1.74 255.255.0.0 + description OOB Management + ! Configured on launch + vrf forwarding Mgmt-intf + no ip address +! ! ip forward-protocol nd ! @@ -257,45 +281,10 @@ no ip http secure-server ! control-plane ! -banner exec ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner incoming ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner login ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -! -line con 0 - password cisco -line aux 0 -line vty 0 4 - exec-timeout 720 0 - password cisco - login - transport input telnet ssh ! ! -end +end + @@ -303,14 +292,28 @@ end - ! -! Last configuration change at 19:03:17 UTC Fri Jul 10 2015 + ! IOSvL2 Config generated on 2015-09-03 21:26 +! by autonetkit_0.18.1 ! version 15.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service compress-config +no service config +enable password cisco +ip classless +ip subnet-zero +no ip domain lookup +! +line vty 0 4 +transport input ssh telnet +exec-timeout 720 0 +password cisco +login +! +line con 0 +password cisco ! hostname iosvl2-2 ! @@ -318,7 +321,6 @@ boot-start-marker boot-end-marker ! ! -enable password cisco ! no aaa new-model ! @@ -329,7 +331,6 @@ no aaa new-model ! ! ! -no ip domain-lookup ip cef no ipv6 cef ! @@ -339,45 +340,48 @@ spanning-tree extend system-id ! vlan internal allocation policy ascending ! -! -! -! ! ! ! +vrf definition Mgmt-intf ! + address-family ipv4 + exit-address-family + ! + address-family ipv6 + exit-address-family ! ! ! ! ! interface Loopback0 - description Loopback - no ip address + description Loopback ! interface GigabitEthernet0/0 - description Mapped to Vlan1 for management - switchport mode access - media-type rj45 - negotiation auto + description Mapped to Vlan1 for management + ! Configured on launch + switchport mode access + no shutdown ! interface GigabitEthernet0/1 - description to iosvl2-3 - switchport trunk encapsulation dot1q - switchport mode trunk - media-type rj45 - negotiation auto + description to iosvl2-3 + switchport trunk encapsulation dot1q + switchport mode trunk + no shutdown ! interface GigabitEthernet0/2 - description to server-2 - switchport access vlan 2 - switchport mode access - media-type rj45 - negotiation auto + description to server-2 + switchport access vlan 2 + switchport mode access + no shutdown ! interface Vlan1 - description OOB Management - ip address 10.255.1.75 255.255.0.0 + description OOB Management + ! Configured on launch + vrf forwarding Mgmt-intf + no ip address +! ! ip forward-protocol nd ! @@ -391,45 +395,10 @@ no ip http secure-server ! control-plane ! -banner exec ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner incoming ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner login ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -! -line con 0 - password cisco -line aux 0 -line vty 0 4 - exec-timeout 720 0 - password cisco - login - transport input telnet ssh ! ! -end +end + @@ -437,14 +406,28 @@ end - ! -! Last configuration change at 19:03:21 UTC Fri Jul 10 2015 + ! IOSvL2 Config generated on 2015-09-03 21:26 +! by autonetkit_0.18.1 ! version 15.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service compress-config +no service config +enable password cisco +ip classless +ip subnet-zero +no ip domain lookup +! +line vty 0 4 +transport input ssh telnet +exec-timeout 720 0 +password cisco +login +! +line con 0 +password cisco ! hostname iosvl2-3 ! @@ -452,7 +435,6 @@ boot-start-marker boot-end-marker ! ! -enable password cisco ! no aaa new-model ! @@ -463,7 +445,6 @@ no aaa new-model ! ! ! -no ip domain-lookup ip cef no ipv6 cef ! @@ -473,52 +454,54 @@ spanning-tree extend system-id ! vlan internal allocation policy ascending ! -! -! -! ! ! ! +vrf definition Mgmt-intf ! + address-family ipv4 + exit-address-family + ! + address-family ipv6 + exit-address-family ! ! ! ! ! interface Loopback0 - description Loopback - no ip address + description Loopback ! interface GigabitEthernet0/0 - description Mapped to Vlan1 for management - switchport mode access - media-type rj45 - negotiation auto + description Mapped to Vlan1 for management + ! Configured on launch + switchport mode access + no shutdown ! interface GigabitEthernet0/1 - description to iosvl2-2 - switchport trunk encapsulation dot1q - switchport mode trunk - media-type rj45 - negotiation auto + description to iosvl2-2 + switchport trunk encapsulation dot1q + switchport mode trunk + no shutdown ! interface GigabitEthernet0/2 - description to iosvl2-1 - switchport trunk encapsulation dot1q - switchport mode trunk - media-type rj45 - negotiation auto + description to iosvl2-1 + switchport trunk encapsulation dot1q + switchport mode trunk + no shutdown ! interface GigabitEthernet0/3 - description to iosv-1 - switchport access vlan 2 - switchport mode access - media-type rj45 - negotiation auto + description to iosv-1 + switchport access vlan 2 + switchport mode access + no shutdown ! interface Vlan1 - description OOB Management - ip address 10.255.1.76 255.255.0.0 + description OOB Management + ! Configured on launch + vrf forwarding Mgmt-intf + no ip address +! ! ip forward-protocol nd ! @@ -532,45 +515,10 @@ no ip http secure-server ! control-plane ! -banner exec ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner incoming ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -banner login ` -************************************************************************** -* IOSv is strictly limited to use for evaluation, demonstration and IOS * -* education. IOSv is provided as-is and is not supported by Cisco's * -* Technical Advisory Center. Any use or disclosure, in whole or in part, * -* of the IOSv Software or Documentation to any third party for any * -* purposes is expressly prohibited except as otherwise authorized by * -* Cisco in writing. * -**************************************************************************` -! -line con 0 - password cisco -line aux 0 -line vty 0 4 - exec-timeout 720 0 - password cisco - login - transport input telnet ssh ! ! -end +end + @@ -594,7 +542,7 @@ runcmd: - service sshd restart users: - default -- gecos: User configured by VIRL Configuration Engine 0.15.8 +- gecos: User configured by VIRL Configuration Engine 0.18.9 lock-passwd: false name: cisco plain-text-passwd: cisco @@ -631,11 +579,8 @@ write_files: content: |- #!/bin/sh -e ifconfig eth1 up 10.0.0.2 netmask 255.255.0.0 + route add -host 192.168.0.1 gw 10.0.0.1 dev eth1 route add -net 10.0.0.0/16 gw 10.0.0.1 dev eth1 - route add -net 192.168.0.0/29 gw 10.0.0.1 dev eth1 - route del default - route add default gw 10.0.0.1 - route del -net 10.0.0.0 netmask 255.255.0.0 gw 10.0.0.1 exit 0 @@ -658,7 +603,7 @@ runcmd: - service sshd restart users: - default -- gecos: User configured by VIRL Configuration Engine 0.15.8 +- gecos: User configured by VIRL Configuration Engine 0.18.9 lock-passwd: false name: cisco plain-text-passwd: cisco @@ -695,11 +640,8 @@ write_files: content: |- #!/bin/sh -e ifconfig eth1 up 10.0.0.3 netmask 255.255.0.0 + route add -host 192.168.0.1 gw 10.0.0.1 dev eth1 route add -net 10.0.0.0/16 gw 10.0.0.1 dev eth1 - route add -net 192.168.0.0/29 gw 10.0.0.1 dev eth1 - route del default - route add default gw 10.0.0.1 - route del -net 10.0.0.0 netmask 255.255.0.0 gw 10.0.0.1 exit 0