Browse Source

- cumulusvx ospf lab and lxc version of the smb topo

master
Sebastian Rieger 6 years ago
parent
commit
1606ac8913
  1. 322
      GIT-VIRL-HS-Fulda/!Experiments/cumulus-ospf.virl
  2. 542
      GIT-VIRL-HS-Fulda/!Experiments/smb-lxc.virl

322
GIT-VIRL-HS-Fulda/!Experiments/cumulus-ospf.virl

@ -0,0 +1,322 @@
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd">
<extensions>
<entry key="management_network" type="String">exclusive</entry>
</extensions>
<node name="cumulusvx-1" type="SIMPLE" subtype="CumulusVX" location="386,146">
<extensions>
<entry key="config" type="String">#!/bin/bash&#xD;
&#xD;
# vars&#xD;
IP="10.0.0.1"&#xD;
HOSTNAME="cumulusvx-1"&#xD;
&#xD;
# test touch&#xD;
touch /tmp/cumulusvx-config&#xD;
&#xD;
# add VIRL user&#xD;
useradd -m cisco -s /bin/bash&#xD;
echo "cisco:cisco" | chpasswd&#xD;
addgroup cisco sudo&#xD;
&#xD;
# set hostname&#xD;
echo "$IP $HOSTNAME" &gt;&gt;/etc/hosts&#xD;
echo "$HOSTNAME" &gt;/etc/hostname&#xD;
hostname $HOSTNAME&#xD;
&#xD;
# add network interface config&#xD;
cat &lt;&lt; EOF &gt;&gt;/etc/network/interfaces&#xD;
&#xD;
auto lo:1&#xD;
iface lo:1&#xD;
address $IP/32&#xD;
&#xD;
auto swp1&#xD;
iface swp1&#xD;
address $IP/32&#xD;
&#xD;
auto swp2&#xD;
iface swp2&#xD;
address $IP/32&#xD;
EOF&#xD;
&#xD;
ifup -a&#xD;
&#xD;
# add ospf daemon to quagga&#xD;
sed -i.bak -e s/"ospfd=no"/"ospfd=yes"/g /etc/quagga/daemons&#xD;
sed -i.bak -e s/"zebra=no"/"zebra=yes"/g /etc/quagga/daemons&#xD;
service quagga restart&#xD;
&#xD;
# add quagga config&#xD;
cat &lt;&lt; EOF &gt; /etc/quagga/Quagga.conf&#xD;
hostname $HOSTNAME&#xD;
log file /var/log/quagga/ospfd.log&#xD;
log timestamp precision 6&#xD;
username cumulus nopassword&#xD;
!&#xD;
service integrated-vtysh-config&#xD;
!&#xD;
password cn321&#xD;
enable password cn321&#xD;
!&#xD;
interface swp1&#xD;
ip ospf network point-to-point&#xD;
!&#xD;
interface swp2&#xD;
ip ospf network point-to-point&#xD;
!&#xD;
router ospf&#xD;
ospf router-id $IP&#xD;
network $IP/32 area 0.0.0.0&#xD;
!&#xD;
line vty&#xD;
!&#xD;
EOF&#xD;
&#xD;
service quagga restart</entry>
</extensions>
<interface id="0" name="swp1"/>
<interface id="1" name="swp2"/>
</node>
<node name="cumulusvx-2" type="SIMPLE" subtype="CumulusVX" location="629,146">
<extensions>
<entry key="config" type="String">#!/bin/bash&#xD;
&#xD;
# vars&#xD;
IP="10.0.0.2"&#xD;
HOSTNAME="cumulusvx-2"&#xD;
&#xD;
# test touch&#xD;
touch /tmp/cumulusvx-config&#xD;
&#xD;
# add VIRL user&#xD;
useradd -m cisco -s /bin/bash&#xD;
echo "cisco:cisco" | chpasswd&#xD;
addgroup cisco sudo&#xD;
&#xD;
# set hostname&#xD;
echo "$IP $HOSTNAME" &gt;&gt;/etc/hosts&#xD;
echo "$HOSTNAME" &gt;/etc/hostname&#xD;
hostname $HOSTNAME&#xD;
&#xD;
# add network interface config&#xD;
cat &lt;&lt; EOF &gt;&gt;/etc/network/interfaces&#xD;
&#xD;
auto lo:1&#xD;
iface lo:1&#xD;
address $IP/32&#xD;
&#xD;
auto swp1&#xD;
iface swp1&#xD;
address $IP/32&#xD;
&#xD;
auto swp2&#xD;
iface swp2&#xD;
address $IP/32&#xD;
EOF&#xD;
&#xD;
ifup -a&#xD;
&#xD;
# add ospf daemon to quagga&#xD;
sed -i.bak -e s/"ospfd=no"/"ospfd=yes"/g /etc/quagga/daemons&#xD;
sed -i.bak -e s/"zebra=no"/"zebra=yes"/g /etc/quagga/daemons&#xD;
service quagga restart&#xD;
&#xD;
# add quagga config&#xD;
cat &lt;&lt; EOF &gt; /etc/quagga/Quagga.conf&#xD;
hostname $HOSTNAME&#xD;
log file /var/log/quagga/ospfd.log&#xD;
log timestamp precision 6&#xD;
username cumulus nopassword&#xD;
!&#xD;
service integrated-vtysh-config&#xD;
!&#xD;
password cn321&#xD;
enable password cn321&#xD;
!&#xD;
interface swp1&#xD;
ip ospf network point-to-point&#xD;
!&#xD;
interface swp2&#xD;
ip ospf network point-to-point&#xD;
!&#xD;
router ospf&#xD;
ospf router-id $IP&#xD;
network $IP/32 area 0.0.0.0&#xD;
!&#xD;
line vty&#xD;
!&#xD;
EOF&#xD;
&#xD;
service quagga restart</entry>
</extensions>
<interface id="0" name="swp1"/>
<interface id="1" name="swp2"/>
</node>
<node name="cumulusvx-3" type="SIMPLE" subtype="CumulusVX" location="629,275">
<extensions>
<entry key="config" type="String">#!/bin/bash&#xD;
&#xD;
# vars&#xD;
IP="10.0.0.3"&#xD;
LEAF_IP="10.21.0.1"&#xD;
HOSTNAME="cumulusvx-3"&#xD;
&#xD;
# test touch&#xD;
touch /tmp/cumulusvx-config&#xD;
&#xD;
# add VIRL user&#xD;
useradd -m cisco -s /bin/bash&#xD;
echo "cisco:cisco" | chpasswd&#xD;
addgroup cisco sudo&#xD;
&#xD;
# set hostname&#xD;
echo "$IP $HOSTNAME" &gt;&gt;/etc/hosts&#xD;
echo "$HOSTNAME" &gt;/etc/hostname&#xD;
hostname $HOSTNAME&#xD;
&#xD;
# add network interface config&#xD;
cat &lt;&lt; EOF &gt;&gt;/etc/network/interfaces&#xD;
&#xD;
auto lo:1&#xD;
iface lo:1&#xD;
address $IP/32&#xD;
&#xD;
auto lo:2&#xD;
iface lo:2&#xD;
address $LEAF_IP/24&#xD;
&#xD;
auto swp1&#xD;
iface swp1&#xD;
address $IP/32&#xD;
&#xD;
auto swp2&#xD;
iface swp2&#xD;
address $IP/32&#xD;
EOF&#xD;
&#xD;
ifup -a&#xD;
&#xD;
# add ospf daemon to quagga&#xD;
sed -i.bak -e s/"ospfd=no"/"ospfd=yes"/g /etc/quagga/daemons&#xD;
sed -i.bak -e s/"zebra=no"/"zebra=yes"/g /etc/quagga/daemons&#xD;
service quagga restart&#xD;
&#xD;
# add quagga config&#xD;
cat &lt;&lt; EOF &gt; /etc/quagga/Quagga.conf&#xD;
hostname $HOSTNAME&#xD;
log file /var/log/quagga/ospfd.log&#xD;
log timestamp precision 6&#xD;
username cumulus nopassword&#xD;
!&#xD;
service integrated-vtysh-config&#xD;
!&#xD;
password cn321&#xD;
enable password cn321&#xD;
!&#xD;
interface swp1&#xD;
ip ospf network point-to-point&#xD;
!&#xD;
interface swp2&#xD;
ip ospf network point-to-point&#xD;
!&#xD;
router ospf&#xD;
ospf router-id $IP&#xD;
network $IP/32 area 0.0.0.0&#xD;
network $LEAF_IP/24 area 0.0.0.0&#xD;
!&#xD;
line vty&#xD;
!&#xD;
EOF&#xD;
&#xD;
service quagga restart</entry>
</extensions>
<interface id="0" name="swp1"/>
<interface id="1" name="swp2"/>
</node>
<node name="cumulusvx-4" type="SIMPLE" subtype="CumulusVX" location="386,275">
<extensions>
<entry key="config" type="String">#!/bin/bash&#xD;
&#xD;
# vars&#xD;
IP="10.0.0.4"&#xD;
LEAF_IP="10.11.0.1"&#xD;
HOSTNAME="cumulusvx-4"&#xD;
&#xD;
# test touch&#xD;
touch /tmp/cumulusvx-config&#xD;
&#xD;
# add VIRL user&#xD;
useradd -m cisco -s /bin/bash&#xD;
echo "cisco:cisco" | chpasswd&#xD;
addgroup cisco sudo&#xD;
&#xD;
# set hostname&#xD;
echo "$IP $HOSTNAME" &gt;&gt;/etc/hosts&#xD;
echo "$HOSTNAME" &gt;/etc/hostname&#xD;
hostname $HOSTNAME&#xD;
&#xD;
# add network interface config&#xD;
cat &lt;&lt; EOF &gt;&gt;/etc/network/interfaces&#xD;
&#xD;
auto lo:1&#xD;
iface lo:1&#xD;
address $IP/32&#xD;
&#xD;
auto lo:2&#xD;
iface lo:2&#xD;
address $LEAF_IP/24&#xD;
&#xD;
auto swp1&#xD;
iface swp1&#xD;
address $IP/32&#xD;
&#xD;
auto swp2&#xD;
iface swp2&#xD;
address $IP/32&#xD;
EOF&#xD;
&#xD;
ifup -a&#xD;
&#xD;
# add ospf daemon to quagga&#xD;
sed -i.bak -e s/"ospfd=no"/"ospfd=yes"/g /etc/quagga/daemons&#xD;
sed -i.bak -e s/"zebra=no"/"zebra=yes"/g /etc/quagga/daemons&#xD;
service quagga restart&#xD;
&#xD;
# add quagga config&#xD;
cat &lt;&lt; EOF &gt; /etc/quagga/Quagga.conf&#xD;
hostname $HOSTNAME&#xD;
log file /var/log/quagga/ospfd.log&#xD;
log timestamp precision 6&#xD;
username cumulus nopassword&#xD;
!&#xD;
service integrated-vtysh-config&#xD;
!&#xD;
password cn321&#xD;
enable password cn321&#xD;
!&#xD;
interface swp1&#xD;
ip ospf network point-to-point&#xD;
!&#xD;
interface swp2&#xD;
ip ospf network point-to-point&#xD;
!&#xD;
router ospf&#xD;
ospf router-id $IP&#xD;
network $IP/32 area 0.0.0.0&#xD;
network $LEAF_IP/24 area 0.0.0.0&#xD;
!&#xD;
line vty&#xD;
!&#xD;
EOF&#xD;
&#xD;
service quagga restart</entry>
</extensions>
<interface id="0" name="swp1"/>
<interface id="1" name="swp2"/>
</node>
<connection dst="/virl:topology/virl:node[4]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[3]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[2]"/>
<connection dst="/virl:topology/virl:node[3]/virl:interface[2]" src="/virl:topology/virl:node[2]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[4]/virl:interface[2]" src="/virl:topology/virl:node[2]/virl:interface[2]"/>
</topology>

542
GIT-VIRL-HS-Fulda/!Experiments/smb-lxc.virl

@ -0,0 +1,542 @@
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd">
<extensions>
<entry key="management_network" type="String">exclusive</entry>
</extensions>
<node name="flat-1" type="ASSET" subtype="FLAT" location="288,78">
<interface id="0" name="link0"/>
</node>
<node name="iosv-1" type="SIMPLE" subtype="IOSv" location="397,74">
<extensions>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
<entry key="config" type="String">!&#xD;
! Last configuration change at 21:23:40 UTC Thu Sep 3 2015&#xD;
!&#xD;
version 15.5&#xD;
service timestamps debug datetime msec&#xD;
service timestamps log datetime msec&#xD;
no service password-encryption&#xD;
!&#xD;
hostname iosv-1&#xD;
!&#xD;
boot-start-marker&#xD;
boot-end-marker&#xD;
!&#xD;
!&#xD;
vrf definition Mgmt-intf&#xD;
!&#xD;
address-family ipv4&#xD;
exit-address-family&#xD;
!&#xD;
address-family ipv6&#xD;
exit-address-family&#xD;
!&#xD;
enable password cisco&#xD;
!&#xD;
no aaa new-model&#xD;
ethernet lmi ce&#xD;
!&#xD;
!&#xD;
!&#xD;
mmi polling-interval 60&#xD;
no mmi auto-configure&#xD;
no mmi pvc&#xD;
mmi snmp-timeout 180&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
no ip domain lookup&#xD;
ip cef&#xD;
ipv6 unicast-routing&#xD;
ipv6 cef&#xD;
!&#xD;
multilink bundle-name authenticated&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
redundancy&#xD;
!&#xD;
no cdp run&#xD;
!&#xD;
! &#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
interface Loopback0&#xD;
description Loopback&#xD;
ip address 192.168.0.1 255.255.255.255&#xD;
!&#xD;
interface GigabitEthernet0/0&#xD;
description OOB Management&#xD;
vrf forwarding Mgmt-intf&#xD;
ip address 10.255.0.116 255.255.0.0&#xD;
duplex full&#xD;
speed auto&#xD;
media-type rj45&#xD;
!&#xD;
interface GigabitEthernet0/1&#xD;
description to iosvl2-3&#xD;
ip address 10.0.0.1 255.255.0.0&#xD;
ip nat inside&#xD;
ip virtual-reassembly in&#xD;
ip ospf cost 1&#xD;
duplex full&#xD;
speed auto&#xD;
media-type rj45&#xD;
!&#xD;
interface GigabitEthernet0/2&#xD;
description to flat-1&#xD;
ip address 172.16.1.89 255.255.255.0&#xD;
ip nat outside&#xD;
ip virtual-reassembly in&#xD;
duplex full&#xD;
speed auto&#xD;
media-type rj45&#xD;
!&#xD;
router ospf 1&#xD;
passive-interface Loopback0&#xD;
network 10.0.0.0 0.0.255.255 area 0&#xD;
network 192.168.0.1 0.0.0.0 area 0&#xD;
!&#xD;
ip forward-protocol nd&#xD;
!&#xD;
!&#xD;
no ip http server&#xD;
no ip http secure-server&#xD;
ip nat pool flatpool 172.16.1.89 172.16.1.89 prefix-length 30&#xD;
ip nat inside source list 1 pool flatpool overload&#xD;
ip route 0.0.0.0 0.0.0.0 172.16.1.254&#xD;
!&#xD;
!&#xD;
!&#xD;
access-list 1 permit 10.0.0.0 0.255.255.255&#xD;
!&#xD;
control-plane&#xD;
!&#xD;
banner exec `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
banner incoming `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
banner login `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
!&#xD;
line con 0&#xD;
password cisco&#xD;
line aux 0&#xD;
line vty 0 4&#xD;
exec-timeout 720 0&#xD;
password cisco&#xD;
login&#xD;
transport input telnet ssh&#xD;
!&#xD;
no scheduler allocate&#xD;
!&#xD;
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.1" netPrefixLenV4="16"/>
<interface id="1" name="GigabitEthernet0/2"/>
</node>
<node name="iosvl2-1" type="SIMPLE" subtype="IOSvL2" location="251,242">
<extensions>
<entry key="config" type="string">! IOSvL2 Config generated on 2015-09-03 21:26
! by autonetkit_0.18.1
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
!
line vty 0 4
transport input ssh telnet
exec-timeout 720 0
password cisco
login
!
line con 0
password cisco
!
hostname iosvl2-1
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
!
!
!
!
interface Loopback0
description Loopback
!
interface GigabitEthernet0/0
description Mapped to Vlan1 for management
! Configured on launch
switchport mode access
no shutdown
!
interface GigabitEthernet0/1
description to iosvl2-3
switchport trunk encapsulation dot1q
switchport mode trunk
no shutdown
!
interface GigabitEthernet0/2
description to server-1
switchport access vlan 2
switchport mode access
no shutdown
!
interface Vlan1
description OOB Management
! Configured on launch
vrf forwarding Mgmt-intf
no ip address
!
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
!
!
end
</entry>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
</node>
<node name="iosvl2-2" type="SIMPLE" subtype="IOSvL2" location="517,242">
<extensions>
<entry key="config" type="string">! IOSvL2 Config generated on 2015-09-03 21:26
! by autonetkit_0.18.1
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
!
line vty 0 4
transport input ssh telnet
exec-timeout 720 0
password cisco
login
!
line con 0
password cisco
!
hostname iosvl2-2
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
!
!
!
!
interface Loopback0
description Loopback
!
interface GigabitEthernet0/0
description Mapped to Vlan1 for management
! Configured on launch
switchport mode access
no shutdown
!
interface GigabitEthernet0/1
description to iosvl2-3
switchport trunk encapsulation dot1q
switchport mode trunk
no shutdown
!
interface GigabitEthernet0/2
description to server-2
switchport access vlan 2
switchport mode access
no shutdown
!
interface Vlan1
description OOB Management
! Configured on launch
vrf forwarding Mgmt-intf
no ip address
!
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
!
!
end
</entry>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
</node>
<node name="iosvl2-3" type="SIMPLE" subtype="IOSvL2" location="391,172">
<extensions>
<entry key="config" type="string">! IOSvL2 Config generated on 2015-09-03 21:26
! by autonetkit_0.18.1
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
no service config
enable password cisco
ip classless
ip subnet-zero
no ip domain lookup
!
line vty 0 4
transport input ssh telnet
exec-timeout 720 0
password cisco
login
!
line con 0
password cisco
!
hostname iosvl2-3
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
!
!
!
!
!
ip cef
no ipv6 cef
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
!
!
!
!
interface Loopback0
description Loopback
!
interface GigabitEthernet0/0
description Mapped to Vlan1 for management
! Configured on launch
switchport mode access
no shutdown
!
interface GigabitEthernet0/1
description to iosvl2-2
switchport trunk encapsulation dot1q
switchport mode trunk
no shutdown
!
interface GigabitEthernet0/2
description to iosvl2-1
switchport trunk encapsulation dot1q
switchport mode trunk
no shutdown
!
interface GigabitEthernet0/3
description to iosv-1
switchport access vlan 2
switchport mode access
no shutdown
!
interface Vlan1
description OOB Management
! Configured on launch
vrf forwarding Mgmt-intf
no ip address
!
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
!
!
end
</entry>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
</node>
<node name="lxc-1" type="SIMPLE" subtype="lxc" location="259,323">
<interface id="0" name="eth1"/>
</node>
<node name="lxc-2" type="SIMPLE" subtype="lxc" location="527,321">
<interface id="0" name="eth1"/>
</node>
<connection dst="/virl:topology/virl:node[5]/virl:interface[1]" src="/virl:topology/virl:node[4]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[3]/virl:interface[1]" src="/virl:topology/virl:node[5]/virl:interface[2]"/>
<connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[5]/virl:interface[3]"/>
<connection dst="/virl:topology/virl:node[1]/virl:interface[1]" src="/virl:topology/virl:node[2]/virl:interface[2]"/>
<connection dst="/virl:topology/virl:node[3]/virl:interface[3]" src="/virl:topology/virl:node[6]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[7]/virl:interface[1]" src="/virl:topology/virl:node[4]/virl:interface[3]"/>
</topology>
Loading…
Cancel
Save