diff --git a/GIT-VIRL-HS-Fulda/!Experiments/cumulus-ospf.virl b/GIT-VIRL-HS-Fulda/!Experiments/cumulus-ospf.virl
new file mode 100644
index 0000000..f7c118d
--- /dev/null
+++ b/GIT-VIRL-HS-Fulda/!Experiments/cumulus-ospf.virl
@@ -0,0 +1,322 @@
+
+
+
+ exclusive
+
+
+
+ #!/bin/bash
+
+# vars
+IP="10.0.0.1"
+HOSTNAME="cumulusvx-1"
+
+# test touch
+touch /tmp/cumulusvx-config
+
+# add VIRL user
+useradd -m cisco -s /bin/bash
+echo "cisco:cisco" | chpasswd
+addgroup cisco sudo
+
+# set hostname
+echo "$IP $HOSTNAME" >>/etc/hosts
+echo "$HOSTNAME" >/etc/hostname
+hostname $HOSTNAME
+
+# add network interface config
+cat << EOF >>/etc/network/interfaces
+
+auto lo:1
+iface lo:1
+address $IP/32
+
+auto swp1
+iface swp1
+address $IP/32
+
+auto swp2
+iface swp2
+address $IP/32
+EOF
+
+ifup -a
+
+# add ospf daemon to quagga
+sed -i.bak -e s/"ospfd=no"/"ospfd=yes"/g /etc/quagga/daemons
+sed -i.bak -e s/"zebra=no"/"zebra=yes"/g /etc/quagga/daemons
+service quagga restart
+
+# add quagga config
+cat << EOF > /etc/quagga/Quagga.conf
+hostname $HOSTNAME
+log file /var/log/quagga/ospfd.log
+log timestamp precision 6
+username cumulus nopassword
+!
+service integrated-vtysh-config
+!
+password cn321
+enable password cn321
+!
+interface swp1
+ ip ospf network point-to-point
+!
+interface swp2
+ ip ospf network point-to-point
+!
+router ospf
+ ospf router-id $IP
+ network $IP/32 area 0.0.0.0
+!
+line vty
+!
+EOF
+
+service quagga restart
+
+
+
+
+
+
+ #!/bin/bash
+
+# vars
+IP="10.0.0.2"
+HOSTNAME="cumulusvx-2"
+
+# test touch
+touch /tmp/cumulusvx-config
+
+# add VIRL user
+useradd -m cisco -s /bin/bash
+echo "cisco:cisco" | chpasswd
+addgroup cisco sudo
+
+# set hostname
+echo "$IP $HOSTNAME" >>/etc/hosts
+echo "$HOSTNAME" >/etc/hostname
+hostname $HOSTNAME
+
+# add network interface config
+cat << EOF >>/etc/network/interfaces
+
+auto lo:1
+iface lo:1
+address $IP/32
+
+auto swp1
+iface swp1
+address $IP/32
+
+auto swp2
+iface swp2
+address $IP/32
+EOF
+
+ifup -a
+
+# add ospf daemon to quagga
+sed -i.bak -e s/"ospfd=no"/"ospfd=yes"/g /etc/quagga/daemons
+sed -i.bak -e s/"zebra=no"/"zebra=yes"/g /etc/quagga/daemons
+service quagga restart
+
+# add quagga config
+cat << EOF > /etc/quagga/Quagga.conf
+hostname $HOSTNAME
+log file /var/log/quagga/ospfd.log
+log timestamp precision 6
+username cumulus nopassword
+!
+service integrated-vtysh-config
+!
+password cn321
+enable password cn321
+!
+interface swp1
+ ip ospf network point-to-point
+!
+interface swp2
+ ip ospf network point-to-point
+!
+router ospf
+ ospf router-id $IP
+ network $IP/32 area 0.0.0.0
+!
+line vty
+!
+EOF
+
+service quagga restart
+
+
+
+
+
+
+ #!/bin/bash
+
+# vars
+IP="10.0.0.3"
+LEAF_IP="10.21.0.1"
+HOSTNAME="cumulusvx-3"
+
+# test touch
+touch /tmp/cumulusvx-config
+
+# add VIRL user
+useradd -m cisco -s /bin/bash
+echo "cisco:cisco" | chpasswd
+addgroup cisco sudo
+
+# set hostname
+echo "$IP $HOSTNAME" >>/etc/hosts
+echo "$HOSTNAME" >/etc/hostname
+hostname $HOSTNAME
+
+# add network interface config
+cat << EOF >>/etc/network/interfaces
+
+auto lo:1
+iface lo:1
+address $IP/32
+
+auto lo:2
+iface lo:2
+address $LEAF_IP/24
+
+auto swp1
+iface swp1
+address $IP/32
+
+auto swp2
+iface swp2
+address $IP/32
+EOF
+
+ifup -a
+
+# add ospf daemon to quagga
+sed -i.bak -e s/"ospfd=no"/"ospfd=yes"/g /etc/quagga/daemons
+sed -i.bak -e s/"zebra=no"/"zebra=yes"/g /etc/quagga/daemons
+service quagga restart
+
+# add quagga config
+cat << EOF > /etc/quagga/Quagga.conf
+hostname $HOSTNAME
+log file /var/log/quagga/ospfd.log
+log timestamp precision 6
+username cumulus nopassword
+!
+service integrated-vtysh-config
+!
+password cn321
+enable password cn321
+!
+interface swp1
+ ip ospf network point-to-point
+!
+interface swp2
+ ip ospf network point-to-point
+!
+router ospf
+ ospf router-id $IP
+ network $IP/32 area 0.0.0.0
+ network $LEAF_IP/24 area 0.0.0.0
+!
+line vty
+!
+EOF
+
+service quagga restart
+
+
+
+
+
+
+ #!/bin/bash
+
+# vars
+IP="10.0.0.4"
+LEAF_IP="10.11.0.1"
+HOSTNAME="cumulusvx-4"
+
+# test touch
+touch /tmp/cumulusvx-config
+
+# add VIRL user
+useradd -m cisco -s /bin/bash
+echo "cisco:cisco" | chpasswd
+addgroup cisco sudo
+
+# set hostname
+echo "$IP $HOSTNAME" >>/etc/hosts
+echo "$HOSTNAME" >/etc/hostname
+hostname $HOSTNAME
+
+# add network interface config
+cat << EOF >>/etc/network/interfaces
+
+auto lo:1
+iface lo:1
+address $IP/32
+
+auto lo:2
+iface lo:2
+address $LEAF_IP/24
+
+auto swp1
+iface swp1
+address $IP/32
+
+auto swp2
+iface swp2
+address $IP/32
+EOF
+
+ifup -a
+
+# add ospf daemon to quagga
+sed -i.bak -e s/"ospfd=no"/"ospfd=yes"/g /etc/quagga/daemons
+sed -i.bak -e s/"zebra=no"/"zebra=yes"/g /etc/quagga/daemons
+service quagga restart
+
+# add quagga config
+cat << EOF > /etc/quagga/Quagga.conf
+hostname $HOSTNAME
+log file /var/log/quagga/ospfd.log
+log timestamp precision 6
+username cumulus nopassword
+!
+service integrated-vtysh-config
+!
+password cn321
+enable password cn321
+!
+interface swp1
+ ip ospf network point-to-point
+!
+interface swp2
+ ip ospf network point-to-point
+!
+router ospf
+ ospf router-id $IP
+ network $IP/32 area 0.0.0.0
+ network $LEAF_IP/24 area 0.0.0.0
+!
+line vty
+!
+EOF
+
+service quagga restart
+
+
+
+
+
+
+
+
+
diff --git a/GIT-VIRL-HS-Fulda/!Experiments/smb-lxc.virl b/GIT-VIRL-HS-Fulda/!Experiments/smb-lxc.virl
new file mode 100644
index 0000000..8753cda
--- /dev/null
+++ b/GIT-VIRL-HS-Fulda/!Experiments/smb-lxc.virl
@@ -0,0 +1,542 @@
+
+
+
+ exclusive
+
+
+
+
+
+
+
+ !
+! Last configuration change at 21:23:40 UTC Thu Sep 3 2015
+!
+version 15.5
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+!
+hostname iosv-1
+!
+boot-start-marker
+boot-end-marker
+!
+!
+vrf definition Mgmt-intf
+ !
+ address-family ipv4
+ exit-address-family
+ !
+ address-family ipv6
+ exit-address-family
+!
+enable password cisco
+!
+no aaa new-model
+ethernet lmi ce
+!
+!
+!
+mmi polling-interval 60
+no mmi auto-configure
+no mmi pvc
+mmi snmp-timeout 180
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+no ip domain lookup
+ip cef
+ipv6 unicast-routing
+ipv6 cef
+!
+multilink bundle-name authenticated
+!
+!
+!
+!
+!
+redundancy
+!
+no cdp run
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+interface Loopback0
+ description Loopback
+ ip address 192.168.0.1 255.255.255.255
+!
+interface GigabitEthernet0/0
+ description OOB Management
+ vrf forwarding Mgmt-intf
+ ip address 10.255.0.116 255.255.0.0
+ duplex full
+ speed auto
+ media-type rj45
+!
+interface GigabitEthernet0/1
+ description to iosvl2-3
+ ip address 10.0.0.1 255.255.0.0
+ ip nat inside
+ ip virtual-reassembly in
+ ip ospf cost 1
+ duplex full
+ speed auto
+ media-type rj45
+!
+interface GigabitEthernet0/2
+ description to flat-1
+ ip address 172.16.1.89 255.255.255.0
+ ip nat outside
+ ip virtual-reassembly in
+ duplex full
+ speed auto
+ media-type rj45
+!
+router ospf 1
+ passive-interface Loopback0
+ network 10.0.0.0 0.0.255.255 area 0
+ network 192.168.0.1 0.0.0.0 area 0
+!
+ip forward-protocol nd
+!
+!
+no ip http server
+no ip http secure-server
+ip nat pool flatpool 172.16.1.89 172.16.1.89 prefix-length 30
+ip nat inside source list 1 pool flatpool overload
+ip route 0.0.0.0 0.0.0.0 172.16.1.254
+!
+!
+!
+access-list 1 permit 10.0.0.0 0.255.255.255
+!
+control-plane
+!
+banner exec `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner incoming `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner login `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+!
+line con 0
+ password cisco
+line aux 0
+line vty 0 4
+ exec-timeout 720 0
+ password cisco
+ login
+ transport input telnet ssh
+!
+no scheduler allocate
+!
+end
+
+
+
+
+
+
+ ! IOSvL2 Config generated on 2015-09-03 21:26
+! by autonetkit_0.18.1
+!
+version 15.2
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+service compress-config
+no service config
+enable password cisco
+ip classless
+ip subnet-zero
+no ip domain lookup
+!
+line vty 0 4
+transport input ssh telnet
+exec-timeout 720 0
+password cisco
+login
+!
+line con 0
+password cisco
+!
+hostname iosvl2-1
+!
+boot-start-marker
+boot-end-marker
+!
+!
+!
+no aaa new-model
+!
+!
+!
+!
+!
+!
+!
+!
+ip cef
+no ipv6 cef
+!
+!
+spanning-tree mode pvst
+spanning-tree extend system-id
+!
+vlan internal allocation policy ascending
+!
+!
+!
+!
+vrf definition Mgmt-intf
+!
+ address-family ipv4
+ exit-address-family
+ !
+ address-family ipv6
+ exit-address-family
+!
+!
+!
+!
+!
+interface Loopback0
+ description Loopback
+!
+interface GigabitEthernet0/0
+ description Mapped to Vlan1 for management
+ ! Configured on launch
+ switchport mode access
+ no shutdown
+!
+interface GigabitEthernet0/1
+ description to iosvl2-3
+ switchport trunk encapsulation dot1q
+ switchport mode trunk
+ no shutdown
+!
+interface GigabitEthernet0/2
+ description to server-1
+ switchport access vlan 2
+ switchport mode access
+ no shutdown
+!
+interface Vlan1
+ description OOB Management
+ ! Configured on launch
+ vrf forwarding Mgmt-intf
+ no ip address
+!
+!
+ip forward-protocol nd
+!
+no ip http server
+no ip http secure-server
+!
+!
+!
+!
+!
+!
+control-plane
+!
+!
+!
+end
+
+
+
+
+
+
+
+
+
+ ! IOSvL2 Config generated on 2015-09-03 21:26
+! by autonetkit_0.18.1
+!
+version 15.2
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+service compress-config
+no service config
+enable password cisco
+ip classless
+ip subnet-zero
+no ip domain lookup
+!
+line vty 0 4
+transport input ssh telnet
+exec-timeout 720 0
+password cisco
+login
+!
+line con 0
+password cisco
+!
+hostname iosvl2-2
+!
+boot-start-marker
+boot-end-marker
+!
+!
+!
+no aaa new-model
+!
+!
+!
+!
+!
+!
+!
+!
+ip cef
+no ipv6 cef
+!
+!
+spanning-tree mode pvst
+spanning-tree extend system-id
+!
+vlan internal allocation policy ascending
+!
+!
+!
+!
+vrf definition Mgmt-intf
+!
+ address-family ipv4
+ exit-address-family
+ !
+ address-family ipv6
+ exit-address-family
+!
+!
+!
+!
+!
+interface Loopback0
+ description Loopback
+!
+interface GigabitEthernet0/0
+ description Mapped to Vlan1 for management
+ ! Configured on launch
+ switchport mode access
+ no shutdown
+!
+interface GigabitEthernet0/1
+ description to iosvl2-3
+ switchport trunk encapsulation dot1q
+ switchport mode trunk
+ no shutdown
+!
+interface GigabitEthernet0/2
+ description to server-2
+ switchport access vlan 2
+ switchport mode access
+ no shutdown
+!
+interface Vlan1
+ description OOB Management
+ ! Configured on launch
+ vrf forwarding Mgmt-intf
+ no ip address
+!
+!
+ip forward-protocol nd
+!
+no ip http server
+no ip http secure-server
+!
+!
+!
+!
+!
+!
+control-plane
+!
+!
+!
+end
+
+
+
+
+
+
+
+
+
+ ! IOSvL2 Config generated on 2015-09-03 21:26
+! by autonetkit_0.18.1
+!
+version 15.2
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+service compress-config
+no service config
+enable password cisco
+ip classless
+ip subnet-zero
+no ip domain lookup
+!
+line vty 0 4
+transport input ssh telnet
+exec-timeout 720 0
+password cisco
+login
+!
+line con 0
+password cisco
+!
+hostname iosvl2-3
+!
+boot-start-marker
+boot-end-marker
+!
+!
+!
+no aaa new-model
+!
+!
+!
+!
+!
+!
+!
+!
+ip cef
+no ipv6 cef
+!
+!
+spanning-tree mode pvst
+spanning-tree extend system-id
+!
+vlan internal allocation policy ascending
+!
+!
+!
+!
+vrf definition Mgmt-intf
+!
+ address-family ipv4
+ exit-address-family
+ !
+ address-family ipv6
+ exit-address-family
+!
+!
+!
+!
+!
+interface Loopback0
+ description Loopback
+!
+interface GigabitEthernet0/0
+ description Mapped to Vlan1 for management
+ ! Configured on launch
+ switchport mode access
+ no shutdown
+!
+interface GigabitEthernet0/1
+ description to iosvl2-2
+ switchport trunk encapsulation dot1q
+ switchport mode trunk
+ no shutdown
+!
+interface GigabitEthernet0/2
+ description to iosvl2-1
+ switchport trunk encapsulation dot1q
+ switchport mode trunk
+ no shutdown
+!
+interface GigabitEthernet0/3
+ description to iosv-1
+ switchport access vlan 2
+ switchport mode access
+ no shutdown
+!
+interface Vlan1
+ description OOB Management
+ ! Configured on launch
+ vrf forwarding Mgmt-intf
+ no ip address
+!
+!
+ip forward-protocol nd
+!
+no ip http server
+no ip http secure-server
+!
+!
+!
+!
+!
+!
+control-plane
+!
+!
+!
+end
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+