You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

856 lines
26 KiB

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd">
<node name="iosv-1" type="SIMPLE" subtype="IOSv" location="310,72" coordinate="52.187404745599686,-109.248046875">
<extensions>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
<entry key="config" type="String">!
! Last configuration change at 15:54:14 UTC Thu Jan 7 2016
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname iosv-1
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
no cdp run
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
description Loopback
ip address 10.10.10.1 255.255.255.255
!
interface GigabitEthernet0/0
ip address 10.255.0.60 255.255.0.0
shutdown
duplex auto
speed auto
media-type rj45
!
interface GigabitEthernet0/1
description to flat-1
ip address 172.16.1.115 255.255.255.0
ip ospf 1 area 0
duplex full
speed auto
media-type rj45
!
interface GigabitEthernet0/2
description to iosvl2-1
no ip address
duplex full
speed auto
media-type rj45
!
interface GigabitEthernet0/2.10
description VLAN10
encapsulation dot1Q 10
ip address 192.168.11.254 255.255.255.0
ip ospf cost 1
!
interface GigabitEthernet0/2.20
description VLAN20
encapsulation dot1Q 20
ip address 192.168.12.254 255.255.255.0
ip ospf cost 1
!
interface GigabitEthernet0/2.30
description VLAN30
encapsulation dot1Q 30
ip address 192.168.13.254 255.255.255.0
ip ospf cost 1
!
router ospf 1
passive-interface Loopback0
network 192.168.11.0 0.0.0.255 area 0
network 192.168.12.0 0.0.0.255 area 0
network 192.168.13.0 0.0.0.255 area 0
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
password cisco
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
</node>
<node name="flat-1" type="ASSET" subtype="FLAT" location="145,75" coordinate="52.10650519075632,-116.4990234375">
<interface id="0" name="link0"/>
</node>
<node name="iosvl2-1" type="SIMPLE" subtype="IOSvL2" location="304,210" coordinate="48.312427904071775,-109.51171875">
<extensions>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
<entry key="config" type="String">!&#xD;
! Last configuration change at 15:52:35 UTC Thu Jan 7 2016&#xD;
!&#xD;
version 15.2&#xD;
service timestamps debug datetime msec&#xD;
service timestamps log datetime msec&#xD;
no service password-encryption&#xD;
service compress-config&#xD;
!&#xD;
hostname iosvl2-1&#xD;
!&#xD;
boot-start-marker&#xD;
boot-end-marker&#xD;
!&#xD;
!&#xD;
vrf definition Mgmt-intf&#xD;
!&#xD;
address-family ipv4&#xD;
exit-address-family&#xD;
!&#xD;
address-family ipv6&#xD;
exit-address-family&#xD;
!&#xD;
enable password cisco&#xD;
!&#xD;
no aaa new-model&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
ip routing&#xD;
!&#xD;
!&#xD;
!&#xD;
no ip domain-lookup&#xD;
no ip cef&#xD;
no ipv6 cef&#xD;
!&#xD;
!&#xD;
!&#xD;
spanning-tree mode pvst&#xD;
spanning-tree extend system-id&#xD;
!&#xD;
vlan internal allocation policy ascending&#xD;
!&#xD;
! &#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
interface GigabitEthernet0/0&#xD;
media-type rj45&#xD;
negotiation auto&#xD;
!&#xD;
interface GigabitEthernet0/1&#xD;
description to iosv-1&#xD;
switchport trunk encapsulation dot1q&#xD;
switchport mode trunk&#xD;
media-type rj45&#xD;
negotiation auto&#xD;
!&#xD;
interface GigabitEthernet0/2&#xD;
description to iosvl2-2&#xD;
switchport trunk encapsulation dot1q&#xD;
switchport mode trunk&#xD;
media-type rj45&#xD;
negotiation auto&#xD;
!&#xD;
interface GigabitEthernet0/3&#xD;
description to iosvl2-3&#xD;
switchport trunk encapsulation dot1q&#xD;
switchport mode trunk&#xD;
media-type rj45&#xD;
negotiation auto&#xD;
!&#xD;
interface GigabitEthernet1/0&#xD;
description to server-1&#xD;
switchport access vlan 20&#xD;
switchport access vlan 21&#xD;
switchport access vlan 22&#xD;
switchport access vlan 30&#xD;
switchport access vlan 10&#xD;
switchport mode access&#xD;
media-type rj45&#xD;
negotiation auto&#xD;
!&#xD;
interface Vlan10&#xD;
description VLAN10TEST&#xD;
ip address 192.168.11.252 255.255.255.0&#xD;
no ip route-cache&#xD;
!&#xD;
interface Vlan21&#xD;
description VLAN21TEST&#xD;
ip address 192.168.12.254 255.255.255.0&#xD;
no ip route-cache&#xD;
!&#xD;
interface Vlan22&#xD;
description VLAN22TEST&#xD;
ip address 192.168.200.1 255.255.255.0&#xD;
no ip route-cache&#xD;
!&#xD;
ip forward-protocol nd&#xD;
!&#xD;
no ip http server&#xD;
no ip http secure-server&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
control-plane&#xD;
!&#xD;
banner exec `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
banner incoming `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
banner login `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
!&#xD;
line con 0&#xD;
password cisco&#xD;
line aux 0&#xD;
line vty 0 4&#xD;
exec-timeout 720 0&#xD;
password cisco&#xD;
login&#xD;
transport input telnet ssh&#xD;
!&#xD;
!&#xD;
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
<interface id="3" name="GigabitEthernet1/0"/>
</node>
<node name="iosvl2-2" type="SIMPLE" subtype="IOSvL2" location="172,305" coordinate="45.460130637921004,-115.3125">
<extensions>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
<entry key="config" type="String">!&#xD;
! Last configuration change at 15:53:10 UTC Thu Jan 7 2016&#xD;
!&#xD;
version 15.2&#xD;
service timestamps debug datetime msec&#xD;
service timestamps log datetime msec&#xD;
no service password-encryption&#xD;
service compress-config&#xD;
!&#xD;
hostname iosvl2-2&#xD;
!&#xD;
boot-start-marker&#xD;
boot-end-marker&#xD;
!&#xD;
!&#xD;
vrf definition Mgmt-intf&#xD;
!&#xD;
address-family ipv4&#xD;
exit-address-family&#xD;
!&#xD;
address-family ipv6&#xD;
exit-address-family&#xD;
!&#xD;
enable password cisco&#xD;
!&#xD;
no aaa new-model&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
no ip domain-lookup&#xD;
ip cef&#xD;
no ipv6 cef&#xD;
!&#xD;
!&#xD;
!&#xD;
spanning-tree mode pvst&#xD;
spanning-tree extend system-id&#xD;
!&#xD;
vlan internal allocation policy ascending&#xD;
!&#xD;
! &#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
interface Loopback0&#xD;
description Loopback&#xD;
no ip address&#xD;
!&#xD;
interface GigabitEthernet0/0&#xD;
media-type rj45&#xD;
negotiation auto&#xD;
!&#xD;
interface GigabitEthernet0/1&#xD;
description to iosvl2-1&#xD;
switchport trunk encapsulation dot1q&#xD;
switchport mode trunk&#xD;
media-type rj45&#xD;
negotiation auto&#xD;
!&#xD;
interface GigabitEthernet0/2&#xD;
description to iosvl2-3&#xD;
switchport trunk encapsulation dot1q&#xD;
switchport mode trunk&#xD;
media-type rj45&#xD;
negotiation auto&#xD;
!&#xD;
interface GigabitEthernet0/3&#xD;
description to server-2&#xD;
switchport access vlan 10&#xD;
switchport access vlan 30 &#xD;
switchport access vlan 20&#xD;
switchport mode access&#xD;
media-type rj45&#xD;
negotiation auto&#xD;
!&#xD;
interface GigabitEthernet1/0&#xD;
description to VLAN21TEST&#xD;
switchport access vlan 21&#xD;
switchport mode access&#xD;
media-type rj45&#xD;
negotiation auto&#xD;
!&#xD;
ip forward-protocol nd&#xD;
ip default-gateway 192.168.12.254&#xD;
!&#xD;
no ip http server&#xD;
no ip http secure-server&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
control-plane&#xD;
!&#xD;
banner exec `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
banner incoming `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
banner login `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
!&#xD;
line con 0&#xD;
password cisco&#xD;
line aux 0&#xD;
line vty 0 4&#xD;
exec-timeout 720 0&#xD;
password cisco&#xD;
login&#xD;
transport input telnet ssh&#xD;
!&#xD;
!&#xD;
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
<interface id="3" name="GigabitEthernet1/0"/>
</node>
<node name="server-2" type="SIMPLE" subtype="server" location="172,404" coordinate="42.326062444562034,-115.3125">
<extensions>
<entry key="config" type="String">#cloud-config
bootcmd:
- ln -s -t /etc/rc.d /etc/rc.local
hostname: server-2
manage_etc_hosts: true
runcmd:
- start ttyS0
- systemctl start getty@ttyS0.service
- systemctl start rc-local
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
- echo "UseDNS no" &gt;&gt; /etc/ssh/sshd_config
- service ssh restart
- service sshd restart
users:
- default
- gecos: User configured by VIRL Configuration Engine 0.18.10
lock-passwd: false
name: cisco
plain-text-passwd: cisco
shell: /bin/bash
ssh-authorized-keys:
- VIRL-USER-SSH-PUBLIC-KEY
sudo: ALL=(ALL) ALL
write_files:
- path: /etc/init/ttyS0.conf
owner: root:root
content: |
# ttyS0 - getty
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.
start on stopped rc or RUNLEVEL=[12345]
stop on runlevel [!12345]
respawn
exec /sbin/getty -L 115200 ttyS0 vt102
permissions: '0644'
- path: /etc/systemd/system/dhclient@.service
content: |
[Unit]
Description=Run dhclient on %i interface
After=network.target
[Service]
Type=oneshot
ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
RemainAfterExit=yes
owner: root:root
permissions: '0644'
- path: /etc/rc.local
owner: root:root
permissions: '0755'
content: |-
#!/bin/sh -e
ifconfig eth1 up 192.168.12.1 netmask 255.255.255.0
route add -host 192.168.1.200 gw 192.168.12.254 dev eth1
route add -net 0.0.0.0 gw 192.168.12.254 dev eth1
exit 0
</entry>
</extensions>
<interface id="0" name="eth1"/>
</node>
<node name="server-3" type="SIMPLE" subtype="server" location="410,402" coordinate="42.39100860920504,-104.853515625">
<extensions>
<entry key="config" type="String">#cloud-config&#xD;
bootcmd:&#xD;
- ln -s -t /etc/rc.d /etc/rc.local&#xD;
hostname: server-3&#xD;
manage_etc_hosts: true&#xD;
runcmd:&#xD;
- start ttyS0&#xD;
- systemctl start getty@ttyS0.service&#xD;
- systemctl start rc-local&#xD;
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config&#xD;
- echo "UseDNS no" &gt;&gt; /etc/ssh/sshd_config&#xD;
- service ssh restart&#xD;
- service sshd restart&#xD;
users:&#xD;
- default&#xD;
- gecos: User configured by VIRL Configuration Engine 0.18.10&#xD;
lock-passwd: false&#xD;
name: cisco&#xD;
plain-text-passwd: cisco&#xD;
shell: /bin/bash&#xD;
ssh-authorized-keys:&#xD;
- VIRL-USER-SSH-PUBLIC-KEY&#xD;
sudo: ALL=(ALL) ALL&#xD;
write_files:&#xD;
- path: /etc/init/ttyS0.conf&#xD;
owner: root:root&#xD;
content: |&#xD;
# ttyS0 - getty&#xD;
# This service maintains a getty on ttyS0 from the point the system is&#xD;
# started until it is shut down again.&#xD;
start on stopped rc or RUNLEVEL=[12345]&#xD;
stop on runlevel [!12345]&#xD;
respawn&#xD;
exec /sbin/getty -L 115200 ttyS0 vt102&#xD;
permissions: '0644'&#xD;
- path: /etc/systemd/system/dhclient@.service&#xD;
content: |&#xD;
[Unit]&#xD;
Description=Run dhclient on %i interface&#xD;
After=network.target&#xD;
[Service]&#xD;
Type=oneshot&#xD;
ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease&#xD;
RemainAfterExit=yes&#xD;
owner: root:root&#xD;
permissions: '0644'&#xD;
- path: /etc/rc.local&#xD;
owner: root:root&#xD;
permissions: '0755'&#xD;
content: |-&#xD;
#!/bin/sh -e&#xD;
ifconfig eth1 up 192.168.13.1 netmask 255.255.255.0&#xD;
route add -host 192.168.1.200 gw 192.168.13.254 dev eth1&#xD;
route add -host 10.0.0.2 gw 192.168.13.252 dev eth1&#xD;
route add -net 0.0.0.0 gw 192.168.13.252 dev eth1&#xD;
exit 0&#xD;
</entry>
</extensions>
<interface id="0" name="eth1"/>
</node>
<node name="server-1" type="SIMPLE" subtype="server" location="547,202" coordinate="48.54570549184746,-98.8330078125">
<extensions>
<entry key="config" type="String">#cloud-config&#xD;
bootcmd:&#xD;
- ln -s -t /etc/rc.d /etc/rc.local&#xD;
hostname: server-1&#xD;
manage_etc_hosts: true&#xD;
runcmd:&#xD;
- start ttyS0&#xD;
- systemctl start getty@ttyS0.service&#xD;
- systemctl start rc-local&#xD;
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config&#xD;
- echo "UseDNS no" &gt;&gt; /etc/ssh/sshd_config&#xD;
- service ssh restart&#xD;
- service sshd restart&#xD;
users:&#xD;
- default&#xD;
- gecos: User configured by VIRL Configuration Engine 0.18.10&#xD;
lock-passwd: false&#xD;
name: cisco&#xD;
plain-text-passwd: cisco&#xD;
shell: /bin/bash&#xD;
ssh-authorized-keys:&#xD;
- VIRL-USER-SSH-PUBLIC-KEY&#xD;
sudo: ALL=(ALL) ALL&#xD;
write_files:&#xD;
- path: /etc/init/ttyS0.conf&#xD;
owner: root:root&#xD;
content: |&#xD;
# ttyS0 - getty&#xD;
# This service maintains a getty on ttyS0 from the point the system is&#xD;
# started until it is shut down again.&#xD;
start on stopped rc or RUNLEVEL=[12345]&#xD;
stop on runlevel [!12345]&#xD;
respawn&#xD;
exec /sbin/getty -L 115200 ttyS0 vt102&#xD;
permissions: '0644'&#xD;
- path: /etc/systemd/system/dhclient@.service&#xD;
content: |&#xD;
[Unit]&#xD;
Description=Run dhclient on %i interface&#xD;
After=network.target&#xD;
[Service]&#xD;
Type=oneshot&#xD;
ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease&#xD;
RemainAfterExit=yes&#xD;
owner: root:root&#xD;
permissions: '0644'&#xD;
- path: /etc/rc.local&#xD;
owner: root:root&#xD;
permissions: '0755'&#xD;
content: |-&#xD;
#!/bin/sh -e&#xD;
ifconfig eth1 up 192.168.11.1 netmask 255.255.255.0&#xD;
route add -host 192.168.1.200 gw 192.168.11.254 dev eth1&#xD;
route add -net 0.0.0.0 gw 192.168.11.254 dev eth1&#xD;
exit 0&#xD;
</entry>
</extensions>
<interface id="0" name="eth1"/>
</node>
<node name="iosvl2-3" type="SIMPLE" subtype="IOSvL2" location="410,305" coordinate="45.460130637921004,-104.853515625">
<extensions>
<entry key="AutoNetkit.mgmt_ip" type="string"></entry>
<entry key="config" type="String">!&#xD;
! Last configuration change at 14:59:32 UTC Thu Jan 7 2016&#xD;
!&#xD;
version 15.2&#xD;
service timestamps debug datetime msec&#xD;
service timestamps log datetime msec&#xD;
no service password-encryption&#xD;
service compress-config&#xD;
!&#xD;
hostname iosvl2-3&#xD;
!&#xD;
boot-start-marker&#xD;
boot-end-marker&#xD;
!&#xD;
!&#xD;
vrf definition Mgmt-intf&#xD;
!&#xD;
address-family ipv4&#xD;
exit-address-family&#xD;
!&#xD;
address-family ipv6&#xD;
exit-address-family&#xD;
!&#xD;
enable password cisco&#xD;
!&#xD;
no aaa new-model&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
no ip domain-lookup&#xD;
ip cef&#xD;
no ipv6 cef&#xD;
!&#xD;
!&#xD;
!&#xD;
spanning-tree mode pvst&#xD;
spanning-tree extend system-id&#xD;
!&#xD;
vlan internal allocation policy ascending&#xD;
!&#xD;
! &#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
interface Loopback0&#xD;
description Loopback&#xD;
no ip address&#xD;
!&#xD;
interface GigabitEthernet0/0&#xD;
media-type rj45&#xD;
negotiation auto&#xD;
!&#xD;
interface GigabitEthernet0/1&#xD;
description to iosvl2-1&#xD;
switchport trunk encapsulation dot1q&#xD;
switchport mode trunk&#xD;
media-type rj45&#xD;
negotiation auto&#xD;
!&#xD;
interface GigabitEthernet0/2&#xD;
description to iosvl2-2&#xD;
switchport trunk encapsulation dot1q&#xD;
switchport mode trunk&#xD;
media-type rj45&#xD;
negotiation auto&#xD;
!&#xD;
interface GigabitEthernet0/3&#xD;
description to server-1&#xD;
switchport access vlan 10&#xD;
switchport access vlan 20&#xD;
switchport access vlan 30&#xD;
switchport mode access&#xD;
media-type rj45&#xD;
negotiation auto&#xD;
!&#xD;
interface Vlan30&#xD;
ip address 192.168.13.252 255.255.255.0&#xD;
!&#xD;
ip forward-protocol nd&#xD;
!&#xD;
no ip http server&#xD;
no ip http secure-server&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
!&#xD;
control-plane&#xD;
!&#xD;
banner exec `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
banner incoming `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
banner login `&#xD;
**************************************************************************&#xD;
* IOSv is strictly limited to use for evaluation, demonstration and IOS *&#xD;
* education. IOSv is provided as-is and is not supported by Cisco's *&#xD;
* Technical Advisory Center. Any use or disclosure, in whole or in part, *&#xD;
* of the IOSv Software or Documentation to any third party for any *&#xD;
* purposes is expressly prohibited except as otherwise authorized by *&#xD;
* Cisco in writing. *&#xD;
**************************************************************************`&#xD;
!&#xD;
line con 0&#xD;
password cisco&#xD;
line aux 0&#xD;
line vty 0 4&#xD;
exec-timeout 720 0&#xD;
password cisco&#xD;
login&#xD;
transport input telnet ssh&#xD;
!&#xD;
!&#xD;
end</entry>
</extensions>
<interface id="0" name="GigabitEthernet0/1"/>
<interface id="1" name="GigabitEthernet0/2"/>
<interface id="2" name="GigabitEthernet0/3"/>
</node>
<connection dst="/virl:topology/virl:node[1]/virl:interface[1]" src="/virl:topology/virl:node[2]/virl:interface[1]"/>
<connection dst="/virl:topology/virl:node[3]/virl:interface[1]" src="/virl:topology/virl:node[1]/virl:interface[2]"/>
<connection dst="/virl:topology/virl:node[4]/virl:interface[1]" src="/virl:topology/virl:node[3]/virl:interface[2]"/>
<connection dst="/virl:topology/virl:node[8]/virl:interface[1]" src="/virl:topology/virl:node[3]/virl:interface[3]"/>
<connection dst="/virl:topology/virl:node[8]/virl:interface[2]" src="/virl:topology/virl:node[4]/virl:interface[2]"/>
<connection dst="/virl:topology/virl:node[6]/virl:interface[1]" src="/virl:topology/virl:node[8]/virl:interface[3]"/>
<connection dst="/virl:topology/virl:node[7]/virl:interface[1]" src="/virl:topology/virl:node[3]/virl:interface[4]"/>
<connection dst="/virl:topology/virl:node[5]/virl:interface[1]" src="/virl:topology/virl:node[4]/virl:interface[4]"/>
</topology>