exclusive ! ASAv Config generated on 2015-08-28 10:43 ! by autonetkit_0.18.1 ! hostname asav-1 username cisco password cisco privilege 15 enable password cisco passwd cisco names ! interface Loopback100 description loopback no ip address interface GigabitEthernet0/0 description to flat-1 duplex full nameif outside security-level 0 no shutdown no ip address interface GigabitEthernet0/1 description to nx-osv-1 duplex full nameif inside security-level 100 no shutdown ip address 10.0.128.1 255.255.255.252 interface Management0/0 description OOB Management duplex full management-only nameif mgmt security-level 100 no shutdown ! Configured on launch no ip address ! same-security-traffic permit inter-interface logging enable logging asdm informational user-identity default-domain LOCAL aaa authentication ssh console LOCAL http server enable http 0.0.0.0 0.0.0.0 inside ssh 0.0.0.0 0.0.0.0 inside telnet 0.0.0.0 0.0.0.0 inside http 0.0.0.0 0.0.0.0 mgmt ssh 0.0.0.0 0.0.0.0 mgmt telnet 0.0.0.0 0.0.0.0 mgmt http 0.0.0.0 0.0.0.0 outside ssh 0.0.0.0 0.0.0.0 outside telnet 0.0.0.0 0.0.0.0 outside telnet timeout 15 console timeout 0 username cisco password cisco privilege 15 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect ip-options inspect netbios inspect rtsp inspect sunrpc inspect tftp inspect xdmcp inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect esmtp inspect sqlnet inspect sip inspect skinny inspect icmp inspect http ! service-policy global_policy global no call-home reporting anonymous call-home profile CiscoTAC-1 no active end 100 ! NX-OSv Config generated on 2015-08-28 10:43 ! by autonetkit_0.18.1 ! version 6.2(1) license grace-period ! hostname nx-osv-1 vdc nx-osv-1 id 1 allocate interface Ethernet2/1-48 allocate interface Ethernet3/1-48 limit-resource vlan minimum 16 maximum 4094 limit-resource vrf minimum 2 maximum 4096 limit-resource port-channel minimum 0 maximum 768 limit-resource u4route-mem minimum 96 maximum 96 limit-resource u6route-mem minimum 24 maximum 24 limit-resource m4route-mem minimum 58 maximum 58 limit-resource m6route-mem minimum 8 maximum 8 feature telnet feature ospf username adminbackup password 5 ! role network-operator username admin password 5 $1$KuOSBsvW$Cy0TSD..gEBGBPjzpDgf51 role network-admin username cisco password 5 $1$Nk7ZkwH0$fyiRmMMfIheqE3BqvcL0C1 role network-operator username cisco role network-admin username lab password 5 $1$buoy/oqy$.EXQz8rCn72ii8qtdldj00 role network-admin no password strength-check ip domain-lookup copp profile strict snmp-server user lab network-admin auth md5 0x5ceb414591539ee35159fca86fdfa101 priv 0x5ceb414591539ee35159fca86fdfa101 localizedkey snmp-server user admin network-admin auth md5 0x328945d53e05e8e7207f8c20b142f0b7 priv 0x328945d53e05e8e7207f8c20b142f0b7 localizedkey snmp-server user cisco network-operator auth md5 0x55b3c64a53fb95518e75358ee75e82e9 priv 0x55b3c64a53fb95518e75358ee75e82e9 localizedkey snmp-server user cisco network-admin rmon event 1 log trap public description FATAL(1) owner PMON@FATAL rmon event 2 log trap public description CRITICAL(2) owner PMON@CRITICAL rmon event 3 log trap public description ERROR(3) owner PMON@ERROR rmon event 4 log trap public description WARNING(4) owner PMON@WARNING rmon event 5 log trap public description INFORMATION(5) owner PMON@INFO vlan 1 vrf context management hardware forwarding unicast trace interface Loopback0 description Loopback ip address 192.168.0.3/32 ip router ospf 1 area 0 interface Ethernet2/1 description to asav-1 ip address 10.0.128.2/30 ip router ospf 1 area 0 duplex full no mac-address no shutdown interface Ethernet2/2 description to iosvl2-1 ip address 10.0.0.1/17 ip router ospf 1 area 0 duplex full no mac-address no shutdown interface mgmt0 description OOB Management ! Configured on launch no ip address duplex full no mac-address no shutdown vrf member management line console line vty router ospf 1 router-id 192.168.0.3 ! IOSvL2 Config generated on 2015-08-28 10:43 ! by autonetkit_0.18.1 ! version 15.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service compress-config no service config enable password cisco ip classless ip subnet-zero no ip domain lookup ! line vty 0 4 transport input ssh telnet exec-timeout 720 0 password cisco login ! line con 0 password cisco ! hostname iosvl2-1 ! boot-start-marker boot-end-marker ! ! ! no aaa new-model ! ! ! ! ! ! ! ! ip cef no ipv6 cef ! ! spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! ! ! ! ! interface Loopback0 description Loopback ! interface GigabitEthernet0/0 description Mapped to Vlan1 for management ! Configured on launch switchport mode access no shutdown ! interface GigabitEthernet0/1 description to nx-osv-1 switchport access vlan 2 switchport mode access no shutdown ! interface GigabitEthernet0/2 description to server-1 switchport access vlan 2 switchport mode access no shutdown ! interface GigabitEthernet0/3 description to server-2 switchport access vlan 2 switchport mode access no shutdown ! interface Vlan1 description OOB Management ! Configured on launch vrf forwarding Mgmt-intf no ip address ! ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ! ! ! ! ! control-plane ! ! ! end #cloud-config bootcmd: - ln -s -t /etc/rc.d /etc/rc.local hostname: server-1 manage_etc_hosts: true runcmd: - start ttyS0 - systemctl start getty@ttyS0.service - systemctl start rc-local - sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config - echo "UseDNS no" >> /etc/ssh/sshd_config - service ssh restart - service sshd restart users: - default - gecos: User configured by VIRL Configuration Engine 0.18.9 lock-passwd: false name: cisco plain-text-passwd: cisco shell: /bin/bash ssh-authorized-keys: - VIRL-USER-SSH-PUBLIC-KEY sudo: ALL=(ALL) ALL write_files: - path: /etc/init/ttyS0.conf owner: root:root content: | # ttyS0 - getty # This service maintains a getty on ttyS0 from the point the system is # started until it is shut down again. start on stopped rc or RUNLEVEL=[12345] stop on runlevel [!12345] respawn exec /sbin/getty -L 115200 ttyS0 vt102 permissions: '0644' - path: /etc/systemd/system/dhclient@.service content: | [Unit] Description=Run dhclient on %i interface After=network.target [Service] Type=oneshot ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease RemainAfterExit=yes owner: root:root permissions: '0644' - path: /etc/rc.local owner: root:root permissions: '0755' content: |- #!/bin/sh -e ifconfig eth1 up 10.0.0.2 netmask 255.255.128.0 route add -net 10.0.0.0/16 gw 10.0.0.1 dev eth1 route add -net 192.168.0.0/29 gw 10.0.0.1 dev eth1 exit 0 #cloud-config bootcmd: - ln -s -t /etc/rc.d /etc/rc.local hostname: server-2 manage_etc_hosts: true runcmd: - start ttyS0 - systemctl start getty@ttyS0.service - systemctl start rc-local - sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config - echo "UseDNS no" >> /etc/ssh/sshd_config - service ssh restart - service sshd restart users: - default - gecos: User configured by VIRL Configuration Engine 0.18.9 lock-passwd: false name: cisco plain-text-passwd: cisco shell: /bin/bash ssh-authorized-keys: - VIRL-USER-SSH-PUBLIC-KEY sudo: ALL=(ALL) ALL write_files: - path: /etc/init/ttyS0.conf owner: root:root content: | # ttyS0 - getty # This service maintains a getty on ttyS0 from the point the system is # started until it is shut down again. start on stopped rc or RUNLEVEL=[12345] stop on runlevel [!12345] respawn exec /sbin/getty -L 115200 ttyS0 vt102 permissions: '0644' - path: /etc/systemd/system/dhclient@.service content: | [Unit] Description=Run dhclient on %i interface After=network.target [Service] Type=oneshot ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease RemainAfterExit=yes owner: root:root permissions: '0644' - path: /etc/rc.local owner: root:root permissions: '0755' content: |- #!/bin/sh -e ifconfig eth1 up 10.0.0.3 netmask 255.255.128.0 route add -net 10.0.0.0/16 gw 10.0.0.1 dev eth1 route add -net 192.168.0.0/29 gw 10.0.0.1 dev eth1 exit 0