eigrp false ! ! Last configuration change at 22:03:48 UTC Sun Jan 15 2017 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router-A ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! redundancy ! no cdp run ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 192.168.0.2 255.255.255.255 ! interface GigabitEthernet0/0 description OOB Management vrf forwarding Mgmt-intf ip address 10.255.0.229 255.255.0.0 duplex full speed auto media-type rj45 ! interface GigabitEthernet0/1 description to ISP ip address 192.168.101.2 255.255.255.252 duplex full speed auto media-type rj45 ! interface GigabitEthernet0/2 description toRechnungswesen ip address 192.168.100.1 255.255.255.128 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/4 description toAdminsitration ip address 192.168.100.129 255.255.255.192 duplex auto speed auto media-type rj45 ! interface GigabitEthernet0/3 description toManagement ip address 192.168.100.193 255.255.255.240 duplex auto speed auto media-type rj45 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip route 0.0.0.0 0.0.0.0 192.168.101.1 ! ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco line aux 0 line vty 0 4 exec-timeout 720 0 password cisco login transport input telnet ssh ! no scheduler allocate ! end false ! ! Last configuration change at 22:03:51 UTC Sun Jan 15 2017 ! version 15.6 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router-B ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ethernet lmi ce ! ! ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ! no ip domain lookup ip cef ipv6 unicast-routing ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! redundancy ! no cdp run ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback ip address 192.168.0.3 255.255.255.255 ! interface GigabitEthernet0/0 description OOB Management vrf forwarding Mgmt-intf ip address 10.255.0.230 255.255.0.0 duplex full speed auto media-type rj45 ! interface GigabitEthernet0/1 description to ISP ip address 192.168.102.2 255.255.255.252 ip ospf cost 1 duplex full speed auto media-type rj45 ! interface GigabitEthernet0/2 description toServer ip address 192.168.32.1 255.255.254.0 duplex auto speed auto media-type rj45 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip route 0.0.0.0 0.0.0.0 192.168.102.1 ! ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco line aux 0 line vty 0 4 exec-timeout 720 0 password cisco login transport input telnet ssh ! no scheduler allocate ! end flat false ! ! Last configuration change at 22:03:41 UTC Sun Jan 15 2017 ! version 15.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service compress-config ! hostname Switch-A ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ! ! ! ! ! ! ! ! no ip domain-lookup ip cef no ipv6 cef ! ! ! spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback no ip address ! interface GigabitEthernet0/1 description to Router-B switchport access vlan 2 switchport mode access media-type rj45 negotiation auto ! interface GigabitEthernet0/2 description to Switch-B switchport access vlan 2 switchport mode access media-type rj45 negotiation auto ! interface GigabitEthernet0/3 description to Server-C switchport access vlan 2 switchport mode access media-type rj45 negotiation auto ! interface GigabitEthernet0/0 description OOB management no switchport ip address 10.255.0.231 255.255.0.0 negotiation auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ! ! ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco line aux 0 line vty 0 4 exec-timeout 720 0 password cisco login transport input telnet ssh ! mac address-table aging-time 10 ! end false #cloud-config bootcmd: - ln -s -t /etc/rc.d /etc/rc.local hostname: ISP manage_etc_hosts: true runcmd: - start ttyS0 - systemctl start getty@ttyS0.service - systemctl start rc-local - sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config - echo "UseDNS no" >> /etc/ssh/sshd_config - service ssh restart - service sshd restart users: - default - gecos: User configured by VIRL Configuration Engine 0.23.9 lock-passwd: false name: cisco plain-text-passwd: cisco shell: /bin/bash ssh-authorized-keys: - VIRL-USER-SSH-PUBLIC-KEY sudo: ALL=(ALL) ALL write_files: - path: /etc/init/ttyS0.conf owner: root:root content: | # ttyS0 - getty # This service maintains a getty on ttyS0 from the point the system is # started until it is shut down again. start on stopped rc or RUNLEVEL=[12345] stop on runlevel [!12345] respawn exec /sbin/getty -L 115200 ttyS0 vt102 permissions: '0644' - path: /etc/systemd/system/dhclient@.service content: | [Unit] Description=Run dhclient on %i interface After=network.target [Service] Type=oneshot ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease RemainAfterExit=yes owner: root:root permissions: '0644' - path: /etc/rc.local owner: root:root permissions: '0755' content: |- #!/bin/sh ifconfig eth1 up 192.168.101.1 netmask 255.255.255.252 ifconfig eth2 up 192.168.102.1 netmask 255.255.255.252 dhclient eth0 dhclient eth3 echo 1 > /proc/sys/net/ipv4/ip_forward route add default gw 172.16.1.1 eth3 route add -net 192.168.101.0/30 gw 192.168.101.2 dev eth1 route add -net 192.168.102.0/30 gw 192.168.102.2 dev eth2 route add -net 192.168.100.0/24 gw 192.168.101.2 dev eth1 route add -net 192.168.32.0/20 gw 192.168.102.2 dev eth2 iptables -t nat -A POSTROUTING -o eth3 -j MASQUERADE iptables -P FORWARD ACCEPT iptables -F FORWARD iptables -t nat -A PREROUTING -i eth3 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.2.100:80 iptables -t nat -A PREROUTING -i eth3 -p tcp -m tcp --dport 22 -j DNAT --to-destination 192.168.2.100:22 /sbin/tc qdisc add dev eth2 root handle 1:1 netem delay 100ms loss 5% echo "alias unbug='sudo tc qdisc del dev eth2 root'" >>/home/cisco/.bashrc service ssh start hostname ISP exit 0 false #cloud-config bootcmd: - ln -s -t /etc/rc.d /etc/rc.local hostname: Server-B manage_etc_hosts: true runcmd: - start ttyS0 - systemctl start getty@ttyS0.service - systemctl start rc-local - systemctl start install-webserver - sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config - echo "UseDNS no" >> /etc/ssh/sshd_config - service ssh restart - service sshd restart users: - default - gecos: User configured by VIRL Configuration Engine 0.18.9 lock-passwd: false name: cisco plain-text-passwd: cisco shell: /bin/bash ssh-authorized-keys: - VIRL-USER-SSH-PUBLIC-KEY sudo: ALL=(ALL) ALL write_files: - path: /etc/init/ttyS0.conf owner: root:root content: | # ttyS0 - getty # This service maintains a getty on ttyS0 from the point the system is # started until it is shut down again. start on stopped rc or RUNLEVEL=[12345] stop on runlevel [!12345] respawn exec /sbin/getty -L 115200 ttyS0 vt102 permissions: '0644' - path: /etc/systemd/system/dhclient@.service content: | [Unit] Description=Run dhclient on %i interface After=network.target [Service] Type=oneshot ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease RemainAfterExit=yes owner: root:root permissions: '0644' - path: /etc/rc.local owner: root:root permissions: '0755' content: |- #!/bin/sh -e echo "nameserver 8.8.8.8" >/etc/resolv.conf ifconfig eth1 192.168.32.10 netmask 255.255.254.0 route del default route add default gw 192.168.32.1 exit 0 false #cloud-config bootcmd: - ln -s -t /etc/rc.d /etc/rc.local hostname: Server-A manage_etc_hosts: true runcmd: - start ttyS0 - systemctl start getty@ttyS0.service - systemctl start rc-local - sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config - echo "UseDNS no" >> /etc/ssh/sshd_config - service ssh restart - service sshd restart users: - default - gecos: User configured by VIRL Configuration Engine 0.18.9 lock-passwd: false name: cisco plain-text-passwd: cisco shell: /bin/bash ssh-authorized-keys: - VIRL-USER-SSH-PUBLIC-KEY sudo: ALL=(ALL) ALL write_files: - path: /etc/init/ttyS0.conf owner: root:root content: | # ttyS0 - getty # This service maintains a getty on ttyS0 from the point the system is # started until it is shut down again. start on stopped rc or RUNLEVEL=[12345] stop on runlevel [!12345] respawn exec /sbin/getty -L 115200 ttyS0 vt102 permissions: '0644' - path: /etc/systemd/system/dhclient@.service content: | [Unit] Description=Run dhclient on %i interface After=network.target [Service] Type=oneshot ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease RemainAfterExit=yes owner: root:root permissions: '0644' - path: /etc/rc.local owner: root:root permissions: '0755' content: |- #!/bin/sh -e ifconfig eth1 192.168.32.20 route del default route add default gw 192.168.32.1 exit 0 - path: /etc/resolv.conf owner: root:root permissions: '0644' content: | nameserver 8.8.8.8 false #cloud-config bootcmd: - ln -s -t /etc/rc.d /etc/rc.local hostname: Client manage_etc_hosts: true runcmd: - start ttyS0 - systemctl start getty@ttyS0.service - systemctl start rc-local - sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config - echo "UseDNS no" >> /etc/ssh/sshd_config - service ssh restart - service sshd restart users: - default - gecos: User configured by VIRL Configuration Engine 0.18.9 lock-passwd: false name: cisco plain-text-passwd: cisco shell: /bin/bash ssh-authorized-keys: - VIRL-USER-SSH-PUBLIC-KEY sudo: ALL=(ALL) ALL write_files: - path: /etc/init/ttyS0.conf owner: root:root content: | # ttyS0 - getty # This service maintains a getty on ttyS0 from the point the system is # started until it is shut down again. start on stopped rc or RUNLEVEL=[12345] stop on runlevel [!12345] respawn exec /sbin/getty -L 115200 ttyS0 vt102 permissions: '0644' - path: /etc/systemd/system/dhclient@.service content: | [Unit] Description=Run dhclient on %i interface After=network.target [Service] Type=oneshot ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease RemainAfterExit=yes owner: root:root permissions: '0644' - path: /etc/rc.local owner: root:root permissions: '0755' content: |- !/bin/sh -e ifconfig eth1 192.168.100.194 netmask 255.255.255.240 route del default route add default gw 192.168.100.193 exit 0 - path: /etc/resolv.conf owner: root:root permissions: '0644' content: | #by Patrick. nameserver 8.8.8.8 false #cloud-config bootcmd: - ln -s -t /etc/rc.d /etc/rc.local hostname: Client manage_etc_hosts: true runcmd: - start ttyS0 - systemctl start getty@ttyS0.service - systemctl start rc-local - sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config - echo "UseDNS no" >> /etc/ssh/sshd_config - service ssh restart - service sshd restart users: - default - gecos: User configured by VIRL Configuration Engine 0.18.9 lock-passwd: false name: cisco plain-text-passwd: cisco shell: /bin/bash ssh-authorized-keys: - VIRL-USER-SSH-PUBLIC-KEY sudo: ALL=(ALL) ALL write_files: - path: /etc/init/ttyS0.conf owner: root:root content: | # ttyS0 - getty # This service maintains a getty on ttyS0 from the point the system is # started until it is shut down again. start on stopped rc or RUNLEVEL=[12345] stop on runlevel [!12345] respawn exec /sbin/getty -L 115200 ttyS0 vt102 permissions: '0644' - path: /etc/systemd/system/dhclient@.service content: | [Unit] Description=Run dhclient on %i interface After=network.target [Service] Type=oneshot ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease RemainAfterExit=yes owner: root:root permissions: '0644' - path: /etc/rc.local owner: root:root permissions: '0755' content: |- !/bin/sh -e ifconfig eth1 192.168.100.130 netmask 255.255.255.192 route del default route add default gw 192.168.100.129 exit 0 - path: /etc/resolv.conf owner: root:root permissions: '0644' content: | #by Patrick. nameserver 8.8.8.8 false #cloud-config bootcmd: - ln -s -t /etc/rc.d /etc/rc.local hostname: Client manage_etc_hosts: true runcmd: - start ttyS0 - systemctl start getty@ttyS0.service - systemctl start rc-local - sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config - echo "UseDNS no" >> /etc/ssh/sshd_config - service ssh restart - service sshd restart users: - default - gecos: User configured by VIRL Configuration Engine 0.18.9 lock-passwd: false name: cisco plain-text-passwd: cisco shell: /bin/bash ssh-authorized-keys: - VIRL-USER-SSH-PUBLIC-KEY sudo: ALL=(ALL) ALL write_files: - path: /etc/init/ttyS0.conf owner: root:root content: | # ttyS0 - getty # This service maintains a getty on ttyS0 from the point the system is # started until it is shut down again. start on stopped rc or RUNLEVEL=[12345] stop on runlevel [!12345] respawn exec /sbin/getty -L 115200 ttyS0 vt102 permissions: '0644' - path: /etc/systemd/system/dhclient@.service content: | [Unit] Description=Run dhclient on %i interface After=network.target [Service] Type=oneshot ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease RemainAfterExit=yes owner: root:root permissions: '0644' - path: /etc/rc.local owner: root:root permissions: '0755' content: |- !/bin/sh -e ifconfig eth1 192.168.100.10 netmask 255.255.255.128 route del default route add default gw 192.168.100.1 exit 0 - path: /etc/resolv.conf owner: root:root permissions: '0644' content: | #by Patrick. nameserver 8.8.8.8 ! ! Last configuration change at 22:03:41 UTC Sun Jan 15 2017 ! version 15.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service compress-config ! hostname Switch-B ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ! ! ! ! ! ! ! ! no ip domain-lookup ip cef no ipv6 cef ! ! ! spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback no ip address ! interface GigabitEthernet0/1 description to Switch-A switchport access vlan 2 switchport mode access media-type rj45 negotiation auto ! interface GigabitEthernet0/2 description to Server-A switchport access vlan 2 switchport mode access media-type rj45 negotiation auto ! interface GigabitEthernet0/3 description to Switch-C switchport access vlan 2 switchport mode access media-type rj45 negotiation auto ! interface GigabitEthernet0/0 description OOB management no switchport ip address 10.255.0.231 255.255.0.0 negotiation auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ! ! ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco line aux 0 line vty 0 4 exec-timeout 720 0 password cisco login transport input telnet ssh ! mac address-table aging-time 10 ! end ! ! Last configuration change at 22:03:41 UTC Sun Jan 15 2017 ! version 15.2 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption service compress-config ! hostname Switch-C ! boot-start-marker boot-end-marker ! ! vrf definition Mgmt-intf ! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family ! enable password cisco ! no aaa new-model ! ! ! ! ! ! ! ! no ip domain-lookup ip cef no ipv6 cef ! ! ! spanning-tree mode pvst spanning-tree extend system-id ! vlan internal allocation policy ascending ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 description Loopback no ip address ! interface GigabitEthernet0/1 description to Switch-A switchport access vlan 2 switchport mode access media-type rj45 negotiation auto ! interface GigabitEthernet0/2 description to Server-A switchport access vlan 2 switchport mode access media-type rj45 negotiation auto ! interface GigabitEthernet0/3 description to Switch-B switchport access vlan 2 switchport mode access media-type rj45 negotiation auto ! interface GigabitEthernet0/0 description OOB management no switchport ip address 10.255.0.231 255.255.0.0 negotiation auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ! ! ! ! ! control-plane ! banner exec ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner incoming ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` banner login ` ************************************************************************** * IOSv is strictly limited to use for evaluation, demonstration and IOS * * education. IOSv is provided as-is and is not supported by Cisco's * * Technical Advisory Center. Any use or disclosure, in whole or in part, * * of the IOSv Software or Documentation to any third party for any * * purposes is expressly prohibited except as otherwise authorized by * * Cisco in writing. * **************************************************************************` ! line con 0 password cisco line aux 0 line vty 0 4 exec-timeout 720 0 password cisco login transport input telnet ssh ! mac address-table aging-time 10 ! end