eigrp
false
!
! Last configuration change at 22:03:48 UTC Sun Jan 15 2017
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router-A
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
no cdp run
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
description Loopback
ip address 192.168.0.2 255.255.255.255
!
interface GigabitEthernet0/0
description OOB Management
vrf forwarding Mgmt-intf
ip address 10.255.0.229 255.255.0.0
duplex full
speed auto
media-type rj45
!
interface GigabitEthernet0/1
description to ISP
ip address 192.168.101.2 255.255.255.252
duplex full
speed auto
media-type rj45
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 192.168.101.1
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
password cisco
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end
false
!
! Last configuration change at 22:03:51 UTC Sun Jan 15 2017
!
version 15.6
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router-B
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
no cdp run
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
description Loopback
ip address 192.168.0.3 255.255.255.255
!
interface GigabitEthernet0/0
description OOB Management
vrf forwarding Mgmt-intf
ip address 10.255.0.230 255.255.0.0
duplex full
speed auto
media-type rj45
!
interface GigabitEthernet0/1
description to ISP
ip address 192.168.102.2 255.255.255.252
ip ospf cost 1
duplex full
speed auto
media-type rj45
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 192.168.102.1
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
password cisco
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
no scheduler allocate
!
end
flat
false
!
! Last configuration change at 22:03:41 UTC Sun Jan 15 2017
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname Switch-A
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
!
!
!
!
!
!
!
!
no ip domain-lookup
ip cef
no ipv6 cef
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
description Loopback
no ip address
!
interface GigabitEthernet0/1
description to Router-B
switchport access vlan 2
switchport mode access
media-type rj45
negotiation auto
!
interface GigabitEthernet0/2
description to Switch-B
switchport access vlan 2
switchport mode access
media-type rj45
negotiation auto
!
interface GigabitEthernet0/3
description to Server-C
switchport access vlan 2
switchport mode access
media-type rj45
negotiation auto
!
interface GigabitEthernet0/0
description OOB management
no switchport
ip address 10.255.0.231 255.255.0.0
negotiation auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
password cisco
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
mac address-table aging-time 10
!
end
false
#cloud-config
bootcmd:
- ln -s -t /etc/rc.d /etc/rc.local
hostname: ISP
manage_etc_hosts: true
runcmd:
- start ttyS0
- systemctl start getty@ttyS0.service
- systemctl start rc-local
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
- echo "UseDNS no" >> /etc/ssh/sshd_config
- service ssh restart
- service sshd restart
users:
- default
- gecos: User configured by VIRL Configuration Engine 0.23.9
lock-passwd: false
name: cisco
plain-text-passwd: cisco
shell: /bin/bash
ssh-authorized-keys:
- VIRL-USER-SSH-PUBLIC-KEY
sudo: ALL=(ALL) ALL
write_files:
- path: /etc/init/ttyS0.conf
owner: root:root
content: |
# ttyS0 - getty
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.
start on stopped rc or RUNLEVEL=[12345]
stop on runlevel [!12345]
respawn
exec /sbin/getty -L 115200 ttyS0 vt102
permissions: '0644'
- path: /etc/systemd/system/dhclient@.service
content: |
[Unit]
Description=Run dhclient on %i interface
After=network.target
[Service]
Type=oneshot
ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
RemainAfterExit=yes
owner: root:root
permissions: '0644'
- path: /etc/rc.local
owner: root:root
permissions: '0755'
content: |-
#!/bin/sh
ifconfig eth1 up 192.168.101.1 netmask 255.255.255.252
ifconfig eth2 up 192.168.102.1 netmask 255.255.255.252
dhclient eth0
dhclient eth3
echo 1 > /proc/sys/net/ipv4/ip_forward
route add default gw 172.16.1.1 eth3
route add -net 192.168.101.0/30 gw 192.168.101.2 dev eth1
route add -net 192.168.102.0/30 gw 192.168.102.2 dev eth2
route add -net 192.168.100.0/24 gw 192.168.101.2 dev eth1
route add -net 192.168.32.0/20 gw 192.168.102.2 dev eth2
iptables -t nat -A POSTROUTING -o eth3 -j MASQUERADE
iptables -P FORWARD ACCEPT
iptables -F FORWARD
iptables -t nat -A PREROUTING -i eth3 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.2.100:80
iptables -t nat -A PREROUTING -i eth3 -p tcp -m tcp --dport 22 -j DNAT --to-destination 192.168.2.100:22
/sbin/tc qdisc add dev eth2 root handle 1:1 netem delay 100ms loss 5%
echo "alias unbug='sudo tc qdisc del dev eth2 root'" >>/home/cisco/.bashrc
service ssh start
hostname ISP
exit 0
false
#cloud-config
bootcmd:
- ln -s -t /etc/rc.d /etc/rc.local
hostname: Server-B
manage_etc_hosts: true
runcmd:
- start ttyS0
- systemctl start getty@ttyS0.service
- systemctl start rc-local
- systemctl start install-webserver
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
- echo "UseDNS no" >> /etc/ssh/sshd_config
- service ssh restart
- service sshd restart
users:
- default
- gecos: User configured by VIRL Configuration Engine 0.18.9
lock-passwd: false
name: cisco
plain-text-passwd: cisco
shell: /bin/bash
ssh-authorized-keys:
- VIRL-USER-SSH-PUBLIC-KEY
sudo: ALL=(ALL) ALL
write_files:
- path: /etc/init/ttyS0.conf
owner: root:root
content: |
# ttyS0 - getty
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.
start on stopped rc or RUNLEVEL=[12345]
stop on runlevel [!12345]
respawn
exec /sbin/getty -L 115200 ttyS0 vt102
permissions: '0644'
- path: /etc/systemd/system/dhclient@.service
content: |
[Unit]
Description=Run dhclient on %i interface
After=network.target
[Service]
Type=oneshot
ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
RemainAfterExit=yes
owner: root:root
permissions: '0644'
- path: /etc/rc.local
owner: root:root
permissions: '0755'
content: |-
#!/bin/sh -e
echo "nameserver 8.8.8.8" >/etc/resolv.conf
#ifconfig eth1 192.168.32.10 netmask 255.255.254.0
#route del default
#route add default gw 192.168.32.1
exit 0
false
#cloud-config
bootcmd:
- ln -s -t /etc/rc.d /etc/rc.local
hostname: Server-A
manage_etc_hosts: true
runcmd:
- start ttyS0
- systemctl start getty@ttyS0.service
- systemctl start rc-local
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
- echo "UseDNS no" >> /etc/ssh/sshd_config
- service ssh restart
- service sshd restart
users:
- default
- gecos: User configured by VIRL Configuration Engine 0.18.9
lock-passwd: false
name: cisco
plain-text-passwd: cisco
shell: /bin/bash
ssh-authorized-keys:
- VIRL-USER-SSH-PUBLIC-KEY
sudo: ALL=(ALL) ALL
write_files:
- path: /etc/init/ttyS0.conf
owner: root:root
content: |
# ttyS0 - getty
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.
start on stopped rc or RUNLEVEL=[12345]
stop on runlevel [!12345]
respawn
exec /sbin/getty -L 115200 ttyS0 vt102
permissions: '0644'
- path: /etc/systemd/system/dhclient@.service
content: |
[Unit]
Description=Run dhclient on %i interface
After=network.target
[Service]
Type=oneshot
ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
RemainAfterExit=yes
owner: root:root
permissions: '0644'
- path: /etc/rc.local
owner: root:root
permissions: '0755'
content: |-
#!/bin/sh -e
#ifconfig eth1 192.168.32.20
#route del default
#route add default gw 192.168.32.1
exit 0
- path: /etc/resolv.conf
owner: root:root
permissions: '0644'
content: |
nameserver 8.8.8.8
false
#cloud-config
bootcmd:
- ln -s -t /etc/rc.d /etc/rc.local
hostname: Client
manage_etc_hosts: true
runcmd:
- start ttyS0
- systemctl start getty@ttyS0.service
- systemctl start rc-local
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
- echo "UseDNS no" >> /etc/ssh/sshd_config
- service ssh restart
- service sshd restart
users:
- default
- gecos: User configured by VIRL Configuration Engine 0.18.9
lock-passwd: false
name: cisco
plain-text-passwd: cisco
shell: /bin/bash
ssh-authorized-keys:
- VIRL-USER-SSH-PUBLIC-KEY
sudo: ALL=(ALL) ALL
write_files:
- path: /etc/init/ttyS0.conf
owner: root:root
content: |
# ttyS0 - getty
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.
start on stopped rc or RUNLEVEL=[12345]
stop on runlevel [!12345]
respawn
exec /sbin/getty -L 115200 ttyS0 vt102
permissions: '0644'
- path: /etc/systemd/system/dhclient@.service
content: |
[Unit]
Description=Run dhclient on %i interface
After=network.target
[Service]
Type=oneshot
ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
RemainAfterExit=yes
owner: root:root
permissions: '0644'
- path: /etc/rc.local
owner: root:root
permissions: '0755'
content: |-
!/bin/sh -e
#ifconfig eth1 192.168.100.194 netmask 255.255.255.240
#route del default
#route add default gw 192.168.100.193
exit 0
- path: /etc/resolv.conf
owner: root:root
permissions: '0644'
content: |
#by Patrick.
nameserver 8.8.8.8
false
#cloud-config
bootcmd:
- ln -s -t /etc/rc.d /etc/rc.local
hostname: Client
manage_etc_hosts: true
runcmd:
- start ttyS0
- systemctl start getty@ttyS0.service
- systemctl start rc-local
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
- echo "UseDNS no" >> /etc/ssh/sshd_config
- service ssh restart
- service sshd restart
users:
- default
- gecos: User configured by VIRL Configuration Engine 0.18.9
lock-passwd: false
name: cisco
plain-text-passwd: cisco
shell: /bin/bash
ssh-authorized-keys:
- VIRL-USER-SSH-PUBLIC-KEY
sudo: ALL=(ALL) ALL
write_files:
- path: /etc/init/ttyS0.conf
owner: root:root
content: |
# ttyS0 - getty
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.
start on stopped rc or RUNLEVEL=[12345]
stop on runlevel [!12345]
respawn
exec /sbin/getty -L 115200 ttyS0 vt102
permissions: '0644'
- path: /etc/systemd/system/dhclient@.service
content: |
[Unit]
Description=Run dhclient on %i interface
After=network.target
[Service]
Type=oneshot
ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
RemainAfterExit=yes
owner: root:root
permissions: '0644'
- path: /etc/rc.local
owner: root:root
permissions: '0755'
content: |-
!/bin/sh -e
#ifconfig eth1 192.168.100.130 netmask 255.255.255.192
#route del default
#route add default gw 192.168.100.129
exit 0
- path: /etc/resolv.conf
owner: root:root
permissions: '0644'
content: |
#by Patrick.
nameserver 8.8.8.8
false
#cloud-config
bootcmd:
- ln -s -t /etc/rc.d /etc/rc.local
hostname: Client
manage_etc_hosts: true
runcmd:
- start ttyS0
- systemctl start getty@ttyS0.service
- systemctl start rc-local
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config
- echo "UseDNS no" >> /etc/ssh/sshd_config
- service ssh restart
- service sshd restart
users:
- default
- gecos: User configured by VIRL Configuration Engine 0.18.9
lock-passwd: false
name: cisco
plain-text-passwd: cisco
shell: /bin/bash
ssh-authorized-keys:
- VIRL-USER-SSH-PUBLIC-KEY
sudo: ALL=(ALL) ALL
write_files:
- path: /etc/init/ttyS0.conf
owner: root:root
content: |
# ttyS0 - getty
# This service maintains a getty on ttyS0 from the point the system is
# started until it is shut down again.
start on stopped rc or RUNLEVEL=[12345]
stop on runlevel [!12345]
respawn
exec /sbin/getty -L 115200 ttyS0 vt102
permissions: '0644'
- path: /etc/systemd/system/dhclient@.service
content: |
[Unit]
Description=Run dhclient on %i interface
After=network.target
[Service]
Type=oneshot
ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease
RemainAfterExit=yes
owner: root:root
permissions: '0644'
- path: /etc/rc.local
owner: root:root
permissions: '0755'
content: |-
!/bin/sh -e
#ifconfig eth1 192.168.100.10 netmask 255.255.255.128
#route del default
#route add default gw 192.168.100.1
exit 0
- path: /etc/resolv.conf
owner: root:root
permissions: '0644'
content: |
#by Patrick.
nameserver 8.8.8.8
!
! Last configuration change at 22:03:41 UTC Sun Jan 15 2017
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname Switch-B
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
!
!
!
!
!
!
!
!
no ip domain-lookup
ip cef
no ipv6 cef
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
description Loopback
no ip address
!
interface GigabitEthernet0/1
description to Switch-A
switchport access vlan 2
switchport mode access
media-type rj45
negotiation auto
!
interface GigabitEthernet0/2
description to Server-A
switchport access vlan 2
switchport mode access
media-type rj45
negotiation auto
!
interface GigabitEthernet0/3
description to Switch-C
switchport access vlan 2
switchport mode access
media-type rj45
negotiation auto
!
interface GigabitEthernet0/0
description OOB management
no switchport
ip address 10.255.0.231 255.255.0.0
negotiation auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
password cisco
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
mac address-table aging-time 10
!
end
!
! Last configuration change at 22:03:41 UTC Sun Jan 15 2017
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname Switch-C
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
!
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
enable password cisco
!
no aaa new-model
!
!
!
!
!
!
!
!
no ip domain-lookup
ip cef
no ipv6 cef
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
description Loopback
no ip address
!
interface GigabitEthernet0/1
description to Switch-A
switchport access vlan 2
switchport mode access
media-type rj45
negotiation auto
!
interface GigabitEthernet0/2
description to Server-A
switchport access vlan 2
switchport mode access
media-type rj45
negotiation auto
!
interface GigabitEthernet0/3
description to Switch-B
switchport access vlan 2
switchport mode access
media-type rj45
negotiation auto
!
interface GigabitEthernet0/0
description OOB management
no switchport
ip address 10.255.0.231 255.255.0.0
negotiation auto
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
password cisco
line aux 0
line vty 0 4
exec-timeout 720 0
password cisco
login
transport input telnet ssh
!
mac address-table aging-time 10
!
end