diff --git a/GIT-VIRL-HS-Fulda/Kommunikationsnetze und -protokolle (Bachelor AI)/kommprot-lab3_b-wanem.virl b/GIT-VIRL-HS-Fulda/Kommunikationsnetze und -protokolle (Bachelor AI)/kommprot-lab3_b-wanem.virl
index 492b98f..bb2af5e 100644
--- a/GIT-VIRL-HS-Fulda/Kommunikationsnetze und -protokolle (Bachelor AI)/kommprot-lab3_b-wanem.virl
+++ b/GIT-VIRL-HS-Fulda/Kommunikationsnetze und -protokolle (Bachelor AI)/kommprot-lab3_b-wanem.virl
@@ -5,79 +5,149 @@
eigrp
false
- ! IOS Config generated on 2015-09-06 21:22
-! by autonetkit_0.18.1
+ !
+! Last configuration change at 22:03:48 UTC Sun Jan 15 2017
+!
+version 15.6
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
!
hostname Router-A
+!
boot-start-marker
boot-end-marker
!
-vrf definition Mgmt-intf
!
+vrf definition Mgmt-intf
+ !
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
-!
+enable password cisco
!
no aaa new-model
+ethernet lmi ce
+!
+!
!
+mmi polling-interval 60
+no mmi auto-configure
+no mmi pvc
+mmi snmp-timeout 180
!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+no ip domain lookup
ip cef
ipv6 unicast-routing
ipv6 cef
!
+multilink bundle-name authenticated
!
-service timestamps debug datetime msec
-service timestamps log datetime msec
-no service password-encryption
-no service config
-enable password cisco
-ip classless
-ip subnet-zero
-no ip domain lookup
-line vty 0 4
- transport input ssh telnet
- exec-timeout 720 0
- password cisco
- login
-line con 0
- password cisco
+!
+!
+!
+!
+redundancy
!
no cdp run
!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
!
interface Loopback0
- description Loopback
- ip address 192.168.0.2 255.255.255.255
+ description Loopback
+ ip address 192.168.0.2 255.255.255.255
!
interface GigabitEthernet0/0
- description OOB Management
- vrf forwarding Mgmt-intf
- ! Configured on launch
- no ip address
- duplex full
- speed auto
- no shutdown
+ description OOB Management
+ vrf forwarding Mgmt-intf
+ ip address 10.255.0.229 255.255.0.0
+ duplex full
+ speed auto
+ media-type rj45
!
interface GigabitEthernet0/1
- description to ISP
- ip address 192.168.101.2 255.255.255.252
- duplex full
- speed auto
- no shutdown
+ description to ISP
+ ip address 192.168.101.2 255.255.255.252
+ duplex full
+ speed auto
+ media-type rj45
!
+ip forward-protocol nd
!
!
+no ip http server
+no ip http secure-server
+ip route 0.0.0.0 0.0.0.0 192.168.101.1
!
-
!
-ip route 0.0.0.0 0.0.0.0 192.168.101.1
!
-end
-
+!
+control-plane
+!
+banner exec `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner incoming `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner login `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+!
+line con 0
+ password cisco
+line aux 0
+line vty 0 4
+ exec-timeout 720 0
+ password cisco
+ login
+ transport input telnet ssh
+!
+no scheduler allocate
+!
+end
@@ -88,78 +158,150 @@ end
false
- ! IOS Config generated on 2015-09-06 21:22
-! by autonetkit_0.18.1
+ !
+! Last configuration change at 22:03:51 UTC Sun Jan 15 2017
+!
+version 15.6
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
!
hostname Router-B
+!
boot-start-marker
boot-end-marker
!
-vrf definition Mgmt-intf
!
+vrf definition Mgmt-intf
+ !
address-family ipv4
exit-address-family
!
address-family ipv6
exit-address-family
!
-!
+enable password cisco
!
no aaa new-model
+ethernet lmi ce
+!
+!
+!
+mmi polling-interval 60
+no mmi auto-configure
+no mmi pvc
+mmi snmp-timeout 180
+!
+!
+!
+!
+!
+!
+!
+!
!
!
+!
+no ip domain lookup
ip cef
ipv6 unicast-routing
ipv6 cef
!
+multilink bundle-name authenticated
!
-service timestamps debug datetime msec
-service timestamps log datetime msec
-no service password-encryption
-no service config
-enable password cisco
-ip classless
-ip subnet-zero
-no ip domain lookup
-line vty 0 4
- transport input ssh telnet
- exec-timeout 720 0
- password cisco
- login
-line con 0
- password cisco
+!
+!
+!
+!
+redundancy
!
no cdp run
!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
!
interface Loopback0
- description Loopback
- ip address 192.168.0.3 255.255.255.255
+ description Loopback
+ ip address 192.168.0.3 255.255.255.255
!
interface GigabitEthernet0/0
- description OOB Management
- vrf forwarding Mgmt-intf
- ! Configured on launch
- no ip address
- duplex full
- speed auto
- no shutdown
+ description OOB Management
+ vrf forwarding Mgmt-intf
+ ip address 10.255.0.230 255.255.0.0
+ duplex full
+ speed auto
+ media-type rj45
!
interface GigabitEthernet0/1
- description to ISP
- ip address 192.168.102.2 255.255.255.252
- ip ospf cost 1
- duplex full
- speed auto
- no shutdown
-
+ description to ISP
+ ip address 192.168.102.2 255.255.255.252
+ ip ospf cost 1
+ duplex full
+ speed auto
+ media-type rj45
!
+ip forward-protocol nd
!
!
+no ip http server
+no ip http secure-server
ip route 0.0.0.0 0.0.0.0 192.168.102.1
- !
-end
-
+!
+!
+!
+!
+control-plane
+!
+banner exec `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner incoming `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner login `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+!
+line con 0
+ password cisco
+line aux 0
+line vty 0 4
+ exec-timeout 720 0
+ password cisco
+ login
+ transport input telnet ssh
+!
+no scheduler allocate
+!
+end
@@ -170,32 +312,18 @@ end
-
+
false
- ! IOSvL2 Config generated on 2015-12-11 21:04
-! by autonetkit_0.18.1
+ !
+! Last configuration change at 22:03:41 UTC Sun Jan 15 2017
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
-no service config
-enable password cisco
-ip classless
-ip subnet-zero
-no ip domain lookup
-!
-line vty 0 4
-transport input ssh telnet
-exec-timeout 720 0
-password cisco
-login
-!
-line con 0
-password cisco
!
hostname Switch-A
!
@@ -203,6 +331,15 @@ boot-start-marker
boot-end-marker
!
!
+vrf definition Mgmt-intf
+ !
+ address-family ipv4
+ exit-address-family
+ !
+ address-family ipv6
+ exit-address-family
+!
+enable password cisco
!
no aaa new-model
!
@@ -213,58 +350,60 @@ no aaa new-model
!
!
!
+no ip domain-lookup
ip cef
no ipv6 cef
!
!
+!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
+!
+!
!
!
!
-vrf definition Mgmt-intf
!
- address-family ipv4
- exit-address-family
- !
- address-family ipv6
- exit-address-family
!
!
!
!
!
-interface Loopback0
- description Loopback
!
-interface GigabitEthernet0/0
- description OOB management
- ! Configured on launch
- no switchport
- no ip address
- no shutdown
+!
+interface Loopback0
+ description Loopback
+ no ip address
!
interface GigabitEthernet0/1
- description to Router-B
- switchport access vlan 2
- switchport mode access
- no shutdown
+ description to Router-B
+ switchport access vlan 2
+ switchport mode access
+ media-type rj45
+ negotiation auto
!
interface GigabitEthernet0/2
- description to Server-A
- switchport access vlan 2
- switchport mode access
- no shutdown
+ description to Switch-B
+ switchport access vlan 2
+ switchport mode access
+ media-type rj45
+ negotiation auto
!
interface GigabitEthernet0/3
- description to Server-B
- switchport access vlan 2
- switchport mode access
- no shutdown
+ description to Server-C
+ switchport access vlan 2
+ switchport mode access
+ media-type rj45
+ negotiation auto
!
+interface GigabitEthernet0/0
+ description OOB management
+ no switchport
+ ip address 10.255.0.231 255.255.0.0
+ negotiation auto
!
ip forward-protocol nd
!
@@ -278,14 +417,52 @@ no ip http secure-server
!
control-plane
!
+banner exec `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner incoming `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner login `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
!
+line con 0
+ password cisco
+line aux 0
+line vty 0 4
+ exec-timeout 720 0
+ password cisco
+ login
+ transport input telnet ssh
!
-end
-
+mac address-table aging-time 10
+!
+end
+
+
@@ -379,7 +556,7 @@ write_files:
-
+
false
#cloud-config
@@ -436,6 +613,9 @@ write_files:
content: |-
#!/bin/sh -e
echo "nameserver 8.8.8.8" >/etc/resolv.conf
+ #ifconfig eth1 192.168.32.10 netmask 255.255.254.0
+ #route del default
+ #route add default gw 192.168.32.1
exit 0
@@ -496,6 +676,9 @@ write_files:
permissions: '0755'
content: |-
#!/bin/sh -e
+ #ifconfig eth1 192.168.32.20
+ #route del default
+ #route add default gw 192.168.32.1
exit 0
- path: /etc/resolv.conf
@@ -560,6 +743,9 @@ write_files:
permissions: '0755'
content: |-
!/bin/sh -e
+ #ifconfig eth1 192.168.100.194 netmask 255.255.255.240
+ #route del default
+ #route add default gw 192.168.100.193
exit 0
- path: /etc/resolv.conf
@@ -626,6 +812,9 @@ write_files:
permissions: '0755'
content: |-
!/bin/sh -e
+ #ifconfig eth1 192.168.100.130 netmask 255.255.255.192
+ #route del default
+ #route add default gw 192.168.100.129
exit 0
- path: /etc/resolv.conf
@@ -692,6 +881,9 @@ write_files:
permissions: '0755'
content: |-
!/bin/sh -e
+ #ifconfig eth1 192.168.100.10 netmask 255.255.255.128
+ #route del default
+ #route add default gw 192.168.100.1
exit 0
- path: /etc/resolv.conf
@@ -704,14 +896,313 @@ write_files:
+
+
+ !
+! Last configuration change at 22:03:41 UTC Sun Jan 15 2017
+!
+version 15.2
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+service compress-config
+!
+hostname Switch-B
+!
+boot-start-marker
+boot-end-marker
+!
+!
+vrf definition Mgmt-intf
+ !
+ address-family ipv4
+ exit-address-family
+ !
+ address-family ipv6
+ exit-address-family
+!
+enable password cisco
+!
+no aaa new-model
+!
+!
+!
+!
+!
+!
+!
+!
+no ip domain-lookup
+ip cef
+no ipv6 cef
+!
+!
+!
+spanning-tree mode pvst
+spanning-tree extend system-id
+!
+vlan internal allocation policy ascending
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+interface Loopback0
+ description Loopback
+ no ip address
+!
+interface GigabitEthernet0/1
+ description to Switch-A
+ switchport access vlan 2
+ switchport mode access
+ media-type rj45
+ negotiation auto
+!
+interface GigabitEthernet0/2
+ description to Server-A
+ switchport access vlan 2
+ switchport mode access
+ media-type rj45
+ negotiation auto
+!
+interface GigabitEthernet0/3
+ description to Switch-C
+ switchport access vlan 2
+ switchport mode access
+ media-type rj45
+ negotiation auto
+!
+interface GigabitEthernet0/0
+ description OOB management
+ no switchport
+ ip address 10.255.0.231 255.255.0.0
+ negotiation auto
+!
+ip forward-protocol nd
+!
+no ip http server
+no ip http secure-server
+!
+!
+!
+!
+!
+!
+control-plane
+!
+banner exec `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner incoming `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner login `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+!
+line con 0
+ password cisco
+line aux 0
+line vty 0 4
+ exec-timeout 720 0
+ password cisco
+ login
+ transport input telnet ssh
+!
+mac address-table aging-time 10
+!
+end
+
+
+
+
+
+
+
+ !
+! Last configuration change at 22:03:41 UTC Sun Jan 15 2017
+!
+version 15.2
+service timestamps debug datetime msec
+service timestamps log datetime msec
+no service password-encryption
+service compress-config
+!
+hostname Switch-C
+!
+boot-start-marker
+boot-end-marker
+!
+!
+vrf definition Mgmt-intf
+ !
+ address-family ipv4
+ exit-address-family
+ !
+ address-family ipv6
+ exit-address-family
+!
+enable password cisco
+!
+no aaa new-model
+!
+!
+!
+!
+!
+!
+!
+!
+no ip domain-lookup
+ip cef
+no ipv6 cef
+!
+!
+!
+spanning-tree mode pvst
+spanning-tree extend system-id
+!
+vlan internal allocation policy ascending
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+!
+interface Loopback0
+ description Loopback
+ no ip address
+!
+interface GigabitEthernet0/1
+ description to Switch-A
+ switchport access vlan 2
+ switchport mode access
+ media-type rj45
+ negotiation auto
+!
+interface GigabitEthernet0/2
+ description to Server-A
+ switchport access vlan 2
+ switchport mode access
+ media-type rj45
+ negotiation auto
+!
+interface GigabitEthernet0/3
+ description to Switch-B
+ switchport access vlan 2
+ switchport mode access
+ media-type rj45
+ negotiation auto
+!
+interface GigabitEthernet0/0
+ description OOB management
+ no switchport
+ ip address 10.255.0.231 255.255.0.0
+ negotiation auto
+!
+ip forward-protocol nd
+!
+no ip http server
+no ip http secure-server
+!
+!
+!
+!
+!
+!
+control-plane
+!
+banner exec `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner incoming `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+banner login `
+**************************************************************************
+* IOSv is strictly limited to use for evaluation, demonstration and IOS *
+* education. IOSv is provided as-is and is not supported by Cisco's *
+* Technical Advisory Center. Any use or disclosure, in whole or in part, *
+* of the IOSv Software or Documentation to any third party for any *
+* purposes is expressly prohibited except as otherwise authorized by *
+* Cisco in writing. *
+**************************************************************************`
+!
+line con 0
+ password cisco
+line aux 0
+line vty 0 4
+ exec-timeout 720 0
+ password cisco
+ login
+ transport input telnet ssh
+!
+mac address-table aging-time 10
+!
+end
+
+
+
+
+
-
-
+
+
+
+
+