diff --git a/GIT-VIRL-HS-Fulda/smb.virl b/GIT-VIRL-HS-Fulda/smb.virl new file mode 100644 index 0000000..a9eed4f --- /dev/null +++ b/GIT-VIRL-HS-Fulda/smb.virl @@ -0,0 +1,714 @@ + + + + + + + + ! +! Last configuration change at 12:23:28 UTC Sat Jun 27 2015 +! +version 15.5 +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +! +hostname iosv-1 +! +boot-start-marker +boot-end-marker +! +! +enable password cisco +! +no aaa new-model +ethernet lmi ce +! +! +! +bsd-client server url https://cloudsso.cisco.com/as/token.oauth2 +mmi polling-interval 60 +no mmi auto-configure +no mmi pvc +mmi snmp-timeout 180 +! +! +! +! +! +! +! +! +! +! +! +no ip domain lookup +ip cef +ipv6 unicast-routing +ipv6 cef +! +multilink bundle-name authenticated +! +! +cts logging verbose +! +! +! +redundancy +! +no cdp run +! +! +! +! +! +! +! +! +! +! +! +! +! +! +interface Loopback0 + description Loopback + ip address 192.168.0.1 255.255.255.255 +! +interface GigabitEthernet0/0 + description OOB Management + ip address 10.255.0.253 255.255.0.0 + duplex auto + speed auto + media-type rj45 +! +interface GigabitEthernet0/1 + description to iosvl2-3 + ip address 10.0.0.1 255.255.0.0 + ip nat inside + ip virtual-reassembly in + ip ospf cost 1 + duplex auto + speed auto + media-type rj45 +! +interface GigabitEthernet0/2 + description to flat-1 + ip address 172.16.1.148 255.255.255.0 + ip nat outside + ip nat enable + ip virtual-reassembly in + duplex auto + speed auto + media-type rj45 +! +router ospf 1 + passive-interface Loopback0 + network 10.0.0.0 0.0.255.255 area 0 + network 192.168.0.1 0.0.0.0 area 0 +! +ip forward-protocol nd +! +! +no ip http server +no ip http secure-server +ip nat inside source list 1 interface GigabitEthernet0/2 overload +ip default-network 172.16.1.0 +ip route 0.0.0.0 0.0.0.0 172.16.1.1 +! +! +! +access-list 1 permit 10.0.0.0 0.0.255.255 +! +control-plane +! +banner exec ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner incoming ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner login ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +! +line con 0 + password cisco +line aux 0 +line vty 0 4 + exec-timeout 720 0 + password cisco + login + transport input telnet ssh +! +no scheduler allocate +! +end + + + + + + + + ! +! Last configuration change at 19:34:48 UTC Fri Jun 26 2015 +! +version 15.2 +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +service compress-config +! +hostname iosvl2-1 +! +boot-start-marker +boot-end-marker +! +! +enable password cisco +! +no aaa new-model +! +! +! +! +! +! +! +! +no ip domain-lookup +ip cef +no ipv6 cef +! +! +spanning-tree mode pvst +spanning-tree extend system-id +! +vlan internal allocation policy ascending +! +! +! +! +! +! +! +! +! +! +! +! +! +interface Loopback0 + description Loopback + no ip address +! +interface GigabitEthernet0/0 + description Mapped to Vlan1 for management + switchport mode access + media-type rj45 + negotiation auto +! +interface GigabitEthernet0/1 + description to iosvl2-3 + switchport trunk encapsulation dot1q + switchport mode trunk + media-type rj45 + negotiation auto +! +interface GigabitEthernet0/2 + description to server-1 + switchport access vlan 2 + switchport mode access + media-type rj45 + negotiation auto +! +interface Vlan1 + description OOB Management + ip address 10.255.0.252 255.255.0.0 +! +ip forward-protocol nd +! +no ip http server +no ip http secure-server +! +! +! +! +! +! +control-plane +! +banner exec ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner incoming ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner login ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +! +line con 0 + password cisco +line aux 0 +line vty 0 4 + exec-timeout 720 0 + password cisco + login + transport input telnet ssh +! +! +end + + + + + + + + ! +! Last configuration change at 19:34:48 UTC Fri Jun 26 2015 +! +version 15.2 +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +service compress-config +! +hostname iosvl2-2 +! +boot-start-marker +boot-end-marker +! +! +enable password cisco +! +no aaa new-model +! +! +! +! +! +! +! +! +no ip domain-lookup +ip cef +no ipv6 cef +! +! +spanning-tree mode pvst +spanning-tree extend system-id +! +vlan internal allocation policy ascending +! +! +! +! +! +! +! +! +! +! +! +! +! +interface Loopback0 + description Loopback + no ip address +! +interface GigabitEthernet0/0 + description Mapped to Vlan1 for management + switchport mode access + media-type rj45 + negotiation auto +! +interface GigabitEthernet0/1 + description to iosvl2-3 + switchport trunk encapsulation dot1q + switchport mode trunk + media-type rj45 + negotiation auto +! +interface GigabitEthernet0/2 + description to server-2 + switchport access vlan 2 + switchport mode access + media-type rj45 + negotiation auto +! +interface Vlan1 + description OOB Management + ip address 10.255.0.247 255.255.0.0 +! +ip forward-protocol nd +! +no ip http server +no ip http secure-server +! +! +! +! +! +! +control-plane +! +banner exec ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner incoming ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner login ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +! +line con 0 + password cisco +line aux 0 +line vty 0 4 + exec-timeout 720 0 + password cisco + login + transport input telnet ssh +! +! +end + + + + + + + + ! +! Last configuration change at 19:34:50 UTC Fri Jun 26 2015 +! +version 15.2 +service timestamps debug datetime msec +service timestamps log datetime msec +no service password-encryption +service compress-config +! +hostname iosvl2-3 +! +boot-start-marker +boot-end-marker +! +! +enable password cisco +! +no aaa new-model +! +! +! +! +! +! +! +! +no ip domain-lookup +ip cef +no ipv6 cef +! +! +spanning-tree mode pvst +spanning-tree extend system-id +! +vlan internal allocation policy ascending +! +! +! +! +! +! +! +! +! +! +! +! +! +interface Loopback0 + description Loopback + no ip address +! +interface GigabitEthernet0/0 + description Mapped to Vlan1 for management + switchport mode access + media-type rj45 + negotiation auto +! +interface GigabitEthernet0/1 + description to iosvl2-2 + switchport trunk encapsulation dot1q + switchport mode trunk + media-type rj45 + negotiation auto +! +interface GigabitEthernet0/2 + description to iosvl2-1 + switchport trunk encapsulation dot1q + switchport mode trunk + media-type rj45 + negotiation auto +! +interface GigabitEthernet0/3 + description to iosv-1 + switchport access vlan 2 + switchport mode access + media-type rj45 + negotiation auto +! +interface Vlan1 + description OOB Management + ip address 10.255.0.250 255.255.0.0 +! +ip forward-protocol nd +! +no ip http server +no ip http secure-server +! +! +! +! +! +! +control-plane +! +banner exec ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner incoming ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +banner login ` +************************************************************************** +* IOSv is strictly limited to use for evaluation, demonstration and IOS * +* education. IOSv is provided as-is and is not supported by Cisco's * +* Technical Advisory Center. Any use or disclosure, in whole or in part, * +* of the IOSv Software or Documentation to any third party for any * +* purposes is expressly prohibited except as otherwise authorized by * +* Cisco in writing. * +**************************************************************************` +! +line con 0 + password cisco +line aux 0 +line vty 0 4 + exec-timeout 720 0 + password cisco + login + transport input telnet ssh +! +! +end + + + + + + + + + #cloud-config +bootcmd: +- ln -s -t /etc/rc.d /etc/rc.local +hostname: server-1 +manage_etc_hosts: true +runcmd: +- start ttyS0 +- systemctl start getty@ttyS0.service +- systemctl start rc-local +- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config +- echo "UseDNS no" >> /etc/ssh/sshd_config +- service ssh restart +- service sshd restart +users: +- default +- gecos: User configured by VIRL Configuration Engine 0.15.8 + lock-passwd: false + name: cisco + plain-text-passwd: cisco + shell: /bin/bash + ssh-authorized-keys: + - VIRL-USER-SSH-PUBLIC-KEY + sudo: ALL=(ALL) ALL +write_files: +- path: /etc/init/ttyS0.conf + owner: root:root + content: | + # ttyS0 - getty + # This service maintains a getty on ttyS0 from the point the system is + # started until it is shut down again. + start on stopped rc or RUNLEVEL=[12345] + stop on runlevel [!12345] + respawn + exec /sbin/getty -L 115200 ttyS0 vt102 + permissions: '0644' +- path: /etc/systemd/system/dhclient@.service + content: | + [Unit] + Description=Run dhclient on %i interface + After=network.target + [Service] + Type=oneshot + ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease + RemainAfterExit=yes + owner: root:root + permissions: '0644' +- path: /etc/rc.local + owner: root:root + permissions: '0755' + content: |- + #!/bin/sh -e + ifconfig eth1 up 10.0.0.2 netmask 255.255.0.0 + route add -net 10.0.0.0/16 gw 10.0.0.1 dev eth1 + route add -net 192.168.0.0/29 gw 10.0.0.1 dev eth1 + route del default + route add default gw 10.0.0.1 + route del -net 10.0.0.0 netmask 255.255.0.0 gw 10.0.0.1 + exit 0 + + + + + + + #cloud-config +bootcmd: +- ln -s -t /etc/rc.d /etc/rc.local +hostname: server-2 +manage_etc_hosts: true +runcmd: +- start ttyS0 +- systemctl start getty@ttyS0.service +- systemctl start rc-local +- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config +- echo "UseDNS no" >> /etc/ssh/sshd_config +- service ssh restart +- service sshd restart +users: +- default +- gecos: User configured by VIRL Configuration Engine 0.15.8 + lock-passwd: false + name: cisco + plain-text-passwd: cisco + shell: /bin/bash + ssh-authorized-keys: + - VIRL-USER-SSH-PUBLIC-KEY + sudo: ALL=(ALL) ALL +write_files: +- path: /etc/init/ttyS0.conf + owner: root:root + content: | + # ttyS0 - getty + # This service maintains a getty on ttyS0 from the point the system is + # started until it is shut down again. + start on stopped rc or RUNLEVEL=[12345] + stop on runlevel [!12345] + respawn + exec /sbin/getty -L 115200 ttyS0 vt102 + permissions: '0644' +- path: /etc/systemd/system/dhclient@.service + content: | + [Unit] + Description=Run dhclient on %i interface + After=network.target + [Service] + Type=oneshot + ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease + RemainAfterExit=yes + owner: root:root + permissions: '0644' +- path: /etc/rc.local + owner: root:root + permissions: '0755' + content: |- + #!/bin/sh -e + ifconfig eth1 up 10.0.0.3 netmask 255.255.0.0 + route add -net 10.0.0.0/16 gw 10.0.0.1 dev eth1 + route add -net 192.168.0.0/29 gw 10.0.0.1 dev eth1 + route del default + route add default gw 10.0.0.1 + route del -net 10.0.0.0 netmask 255.255.0.0 gw 10.0.0.1 + exit 0 + + + + + + + + + + +