You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
|
|
<?xml version="1.0" encoding="UTF-8" standalone="yes"?><topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd"> <extensions> <entry key="management_network" type="String">exclusive</entry> </extensions> <node name="flat-1" type="ASSET" subtype="FLAT" location="288,78"> <interface id="0" name="link0"/> </node> <node name="iosv-1" type="SIMPLE" subtype="IOSv" location="397,74"> <extensions> <entry key="AutoNetkit.mgmt_ip" type="string"></entry> <entry key="config" type="String">!
! Last configuration change at 21:23:40 UTC Thu Sep 3 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname iosv-1
!
boot-start-marker
boot-end-marker
!
!
vrf definition Mgmt-intf
 !
 address-family ipv4
 exit-address-family
 !
 address-family ipv6
 exit-address-family
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
!
redundancy
!
no cdp run
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 192.168.0.1 255.255.255.255
!
interface GigabitEthernet0/0
 description OOB Management
 vrf forwarding Mgmt-intf
 ip address 10.255.0.116 255.255.0.0
 duplex full
 speed auto
 media-type rj45
!
interface GigabitEthernet0/1
 description to iosvl2-3
 ip address 10.0.0.1 255.255.0.0
 ip nat inside
 ip virtual-reassembly in
 ip ospf cost 1
 duplex full
 speed auto
 media-type rj45
!
interface GigabitEthernet0/2
 description to flat-1
 ip address 172.16.1.89 255.255.255.0
 ip nat outside
 ip virtual-reassembly in
 duplex full
 speed auto
 media-type rj45
!
router ospf 1
 passive-interface Loopback0
 network 10.0.0.0 0.0.255.255 area 0
 network 192.168.0.1 0.0.0.0 area 0
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip nat pool flatpool 172.16.1.89 172.16.1.89 prefix-length 30
ip nat inside source list 1 pool flatpool overload
ip route 0.0.0.0 0.0.0.0 172.16.1.254
!
!
!
access-list 1 permit 10.0.0.0 0.255.255.255
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS *
* education. IOSv is provided as-is and is not supported by Cisco's *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any *
* purposes is expressly prohibited except as otherwise authorized by *
* Cisco in writing. *
**************************************************************************`
!
line con 0
 password cisco
line aux 0
line vty 0 4
 exec-timeout 720 0
 password cisco
 login
 transport input telnet ssh
!
no scheduler allocate
!
end</entry> </extensions> <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.1" netPrefixLenV4="16"/> <interface id="1" name="GigabitEthernet0/2"/> </node> <node name="iosvl2-1" type="SIMPLE" subtype="IOSvL2" location="251,242"> <extensions> <entry key="config" type="string">! IOSvL2 Config generated on 2015-09-03 21:26! by autonetkit_0.18.1!version 15.2service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryptionservice compress-configno service configenable password ciscoip classlessip subnet-zerono ip domain lookup!line vty 0 4transport input ssh telnetexec-timeout 720 0password ciscologin!line con 0password cisco!hostname iosvl2-1!boot-start-markerboot-end-marker!!!no aaa new-model!!!!!!!!ip cefno ipv6 cef!!spanning-tree mode pvstspanning-tree extend system-id!vlan internal allocation policy ascending!!!!vrf definition Mgmt-intf! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family!!!!!interface Loopback0 description Loopback!interface GigabitEthernet0/0 description Mapped to Vlan1 for management ! Configured on launch switchport mode access no shutdown!interface GigabitEthernet0/1 description to iosvl2-3 switchport trunk encapsulation dot1q switchport mode trunk no shutdown!interface GigabitEthernet0/2 description to server-1 switchport access vlan 2 switchport mode access no shutdown!interface Vlan1 description OOB Management ! Configured on launch vrf forwarding Mgmt-intf no ip address!!ip forward-protocol nd!no ip http serverno ip http secure-server!!!!!!control-plane!!!end </entry> <entry key="AutoNetkit.mgmt_ip" type="string"></entry> </extensions> <interface id="0" name="GigabitEthernet0/1"/> <interface id="1" name="GigabitEthernet0/2"/> </node> <node name="iosvl2-2" type="SIMPLE" subtype="IOSvL2" location="517,242"> <extensions> <entry key="config" type="string">! IOSvL2 Config generated on 2015-09-03 21:26! by autonetkit_0.18.1!version 15.2service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryptionservice compress-configno service configenable password ciscoip classlessip subnet-zerono ip domain lookup!line vty 0 4transport input ssh telnetexec-timeout 720 0password ciscologin!line con 0password cisco!hostname iosvl2-2!boot-start-markerboot-end-marker!!!no aaa new-model!!!!!!!!ip cefno ipv6 cef!!spanning-tree mode pvstspanning-tree extend system-id!vlan internal allocation policy ascending!!!!vrf definition Mgmt-intf! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family!!!!!interface Loopback0 description Loopback!interface GigabitEthernet0/0 description Mapped to Vlan1 for management ! Configured on launch switchport mode access no shutdown!interface GigabitEthernet0/1 description to iosvl2-3 switchport trunk encapsulation dot1q switchport mode trunk no shutdown!interface GigabitEthernet0/2 description to server-2 switchport access vlan 2 switchport mode access no shutdown!interface Vlan1 description OOB Management ! Configured on launch vrf forwarding Mgmt-intf no ip address!!ip forward-protocol nd!no ip http serverno ip http secure-server!!!!!!control-plane!!!end </entry> <entry key="AutoNetkit.mgmt_ip" type="string"></entry> </extensions> <interface id="0" name="GigabitEthernet0/1"/> <interface id="1" name="GigabitEthernet0/2"/> </node> <node name="iosvl2-3" type="SIMPLE" subtype="IOSvL2" location="391,172"> <extensions> <entry key="config" type="string">! IOSvL2 Config generated on 2015-09-03 21:26! by autonetkit_0.18.1!version 15.2service timestamps debug datetime msecservice timestamps log datetime msecno service password-encryptionservice compress-configno service configenable password ciscoip classlessip subnet-zerono ip domain lookup!line vty 0 4transport input ssh telnetexec-timeout 720 0password ciscologin!line con 0password cisco!hostname iosvl2-3!boot-start-markerboot-end-marker!!!no aaa new-model!!!!!!!!ip cefno ipv6 cef!!spanning-tree mode pvstspanning-tree extend system-id!vlan internal allocation policy ascending!!!!vrf definition Mgmt-intf! address-family ipv4 exit-address-family ! address-family ipv6 exit-address-family!!!!!interface Loopback0 description Loopback!interface GigabitEthernet0/0 description Mapped to Vlan1 for management ! Configured on launch switchport mode access no shutdown!interface GigabitEthernet0/1 description to iosvl2-2 switchport trunk encapsulation dot1q switchport mode trunk no shutdown!interface GigabitEthernet0/2 description to iosvl2-1 switchport trunk encapsulation dot1q switchport mode trunk no shutdown!interface GigabitEthernet0/3 description to iosv-1 switchport access vlan 2 switchport mode access no shutdown!interface Vlan1 description OOB Management ! Configured on launch vrf forwarding Mgmt-intf no ip address!!ip forward-protocol nd!no ip http serverno ip http secure-server!!!!!!control-plane!!!end </entry> <entry key="AutoNetkit.mgmt_ip" type="string"></entry> </extensions> <interface id="0" name="GigabitEthernet0/1"/> <interface id="1" name="GigabitEthernet0/2"/> <interface id="2" name="GigabitEthernet0/3"/> </node> <node name="server-1" type="SIMPLE" subtype="server" location="251,336"> <extensions> <entry key="config" type="String">#cloud-configbootcmd:- ln -s -t /etc/rc.d /etc/rc.localhostname: server-1manage_etc_hosts: trueruncmd:- start ttyS0- systemctl start getty@ttyS0.service- systemctl start rc-local- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config- echo "UseDNS no" >> /etc/ssh/sshd_config- service ssh restart- service sshd restartusers:- default- gecos: User configured by VIRL Configuration Engine 0.18.9 lock-passwd: false name: cisco plain-text-passwd: cisco shell: /bin/bash ssh-authorized-keys: - VIRL-USER-SSH-PUBLIC-KEY sudo: ALL=(ALL) ALLwrite_files:- path: /etc/init/ttyS0.conf owner: root:root content: | # ttyS0 - getty # This service maintains a getty on ttyS0 from the point the system is # started until it is shut down again. start on stopped rc or RUNLEVEL=[12345] stop on runlevel [!12345] respawn exec /sbin/getty -L 115200 ttyS0 vt102 permissions: '0644'- path: /etc/systemd/system/dhclient@.service content: | [Unit] Description=Run dhclient on %i interface After=network.target [Service] Type=oneshot ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease RemainAfterExit=yes owner: root:root permissions: '0644'- path: /etc/rc.local owner: root:root permissions: '0755' content: |- #!/bin/sh -e ifconfig eth1 up 10.0.0.2 netmask 255.255.0.0 route add -host 192.168.0.1 gw 10.0.0.1 dev eth1 route add -net 10.0.0.0/16 gw 10.0.0.1 dev eth1 exit 0</entry> </extensions> <interface id="0" name="eth1" ipv4="10.0.0.2" netPrefixLenV4="16"/> </node> <node name="server-2" type="SIMPLE" subtype="server" location="517,336"> <extensions> <entry key="config" type="String">#cloud-configbootcmd:- ln -s -t /etc/rc.d /etc/rc.localhostname: server-2manage_etc_hosts: trueruncmd:- start ttyS0- systemctl start getty@ttyS0.service- systemctl start rc-local- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config- echo "UseDNS no" >> /etc/ssh/sshd_config- service ssh restart- service sshd restartusers:- default- gecos: User configured by VIRL Configuration Engine 0.18.9 lock-passwd: false name: cisco plain-text-passwd: cisco shell: /bin/bash ssh-authorized-keys: - VIRL-USER-SSH-PUBLIC-KEY sudo: ALL=(ALL) ALLwrite_files:- path: /etc/init/ttyS0.conf owner: root:root content: | # ttyS0 - getty # This service maintains a getty on ttyS0 from the point the system is # started until it is shut down again. start on stopped rc or RUNLEVEL=[12345] stop on runlevel [!12345] respawn exec /sbin/getty -L 115200 ttyS0 vt102 permissions: '0644'- path: /etc/systemd/system/dhclient@.service content: | [Unit] Description=Run dhclient on %i interface After=network.target [Service] Type=oneshot ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease RemainAfterExit=yes owner: root:root permissions: '0644'- path: /etc/rc.local owner: root:root permissions: '0755' content: |- #!/bin/sh -e ifconfig eth1 up 10.0.0.3 netmask 255.255.0.0 route add -host 192.168.0.1 gw 10.0.0.1 dev eth1 route add -net 10.0.0.0/16 gw 10.0.0.1 dev eth1 exit 0</entry> </extensions> <interface id="0" name="eth1" ipv4="10.0.0.3" netPrefixLenV4="16"/> </node> <connection dst="/virl:topology/virl:node[5]/virl:interface[1]" src="/virl:topology/virl:node[4]/virl:interface[1]"/> <connection dst="/virl:topology/virl:node[3]/virl:interface[1]" src="/virl:topology/virl:node[5]/virl:interface[2]"/> <connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[5]/virl:interface[3]"/> <connection dst="/virl:topology/virl:node[1]/virl:interface[1]" src="/virl:topology/virl:node[2]/virl:interface[2]"/> <connection dst="/virl:topology/virl:node[3]/virl:interface[2]" src="/virl:topology/virl:node[6]/virl:interface[1]"/> <connection dst="/virl:topology/virl:node[7]/virl:interface[1]" src="/virl:topology/virl:node[4]/virl:interface[2]"/></topology>
|
