git-virl-hs-fulda/GIT-VIRL-HS-Fulda/smb.virl

<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<topology xmlns="http://www.cisco.com/VIRL" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" schemaVersion="0.9" xsi:schemaLocation="http://www.cisco.com/VIRL https://raw.github.com/CiscoVIRL/schema/v0.9/virl.xsd">
    <node name="flat-1" type="ASSET" subtype="FLAT" location="288,78">
        <interface id="0" name="link0"/>
    </node>
    <node name="iosv-1" type="SIMPLE" subtype="IOSv" location="397,74" ipv4="192.168.0.1">
        <extensions>
            <entry key="config" type="string">!
! Last configuration change at 12:23:28 UTC Sat Jun 27 2015
!
version 15.5
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname iosv-1
!
boot-start-marker
boot-end-marker
!
!
enable password cisco
!
no aaa new-model
ethernet lmi ce
!
!
!
bsd-client server url https://cloudsso.cisco.com/as/token.oauth2
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
cts logging verbose
!
!
!
redundancy
!
no cdp run
!
! 
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 ip address 192.168.0.1 255.255.255.255
!
interface GigabitEthernet0/0
 description OOB Management
 ip address 10.255.0.253 255.255.0.0
 duplex auto
 speed auto
 media-type rj45
!
interface GigabitEthernet0/1
 description to iosvl2-3
 ip address 10.0.0.1 255.255.0.0
 ip nat inside
 ip virtual-reassembly in
 ip ospf cost 1
 duplex auto
 speed auto
 media-type rj45
!
interface GigabitEthernet0/2
 description to flat-1
 ip address 172.16.1.148 255.255.255.0
 ip nat outside
 ip nat enable
 ip virtual-reassembly in
 duplex auto
 speed auto
 media-type rj45
!
router ospf 1
 passive-interface Loopback0
 network 10.0.0.0 0.0.255.255 area 0
 network 192.168.0.1 0.0.0.0 area 0
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip nat inside source list 1 interface GigabitEthernet0/2 overload
ip default-network 172.16.1.0
ip route 0.0.0.0 0.0.0.0 172.16.1.1
!
!
!
access-list 1 permit 10.0.0.0 0.0.255.255
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
!
line con 0
 password cisco
line aux 0
line vty 0 4
 exec-timeout 720 0
 password cisco
 login
 transport input telnet ssh
!
no scheduler allocate
!
end</entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1" ipv4="10.0.0.1" netPrefixLenV4="16"/>
        <interface id="1" name="GigabitEthernet0/2"/>
    </node>
    <node name="iosvl2-1" type="SIMPLE" subtype="IOSvL2" location="251,242">
        <extensions>
            <entry key="config" type="string">!
! Last configuration change at 19:34:48 UTC Fri Jun 26 2015
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname iosvl2-1
!
boot-start-marker
boot-end-marker
!
!
enable password cisco
!
no aaa new-model
!
!
!
!
!
!
!
!
no ip domain-lookup
ip cef
no ipv6 cef
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
! 
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 no ip address
!
interface GigabitEthernet0/0
 description Mapped to Vlan1 for management
 switchport mode access
 media-type rj45
 negotiation auto
!
interface GigabitEthernet0/1
 description to iosvl2-3
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
!
interface GigabitEthernet0/2
 description to server-1
 switchport access vlan 2
 switchport mode access
 media-type rj45
 negotiation auto
!
interface Vlan1
 description OOB Management
 ip address 10.255.0.252 255.255.0.0
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
!
line con 0
 password cisco
line aux 0
line vty 0 4
 exec-timeout 720 0
 password cisco
 login
 transport input telnet ssh
!
!
end</entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
    </node>
    <node name="iosvl2-2" type="SIMPLE" subtype="IOSvL2" location="517,242">
        <extensions>
            <entry key="config" type="string">!
! Last configuration change at 19:34:48 UTC Fri Jun 26 2015
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname iosvl2-2
!
boot-start-marker
boot-end-marker
!
!
enable password cisco
!
no aaa new-model
!
!
!
!
!
!
!
!
no ip domain-lookup
ip cef
no ipv6 cef
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
! 
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 no ip address
!
interface GigabitEthernet0/0
 description Mapped to Vlan1 for management
 switchport mode access
 media-type rj45
 negotiation auto
!
interface GigabitEthernet0/1
 description to iosvl2-3
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
!
interface GigabitEthernet0/2
 description to server-2
 switchport access vlan 2
 switchport mode access
 media-type rj45
 negotiation auto
!
interface Vlan1
 description OOB Management
 ip address 10.255.0.247 255.255.0.0
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
!
line con 0
 password cisco
line aux 0
line vty 0 4
 exec-timeout 720 0
 password cisco
 login
 transport input telnet ssh
!
!
end</entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
    </node>
    <node name="iosvl2-3" type="SIMPLE" subtype="IOSvL2" location="391,172">
        <extensions>
            <entry key="config" type="string">!
! Last configuration change at 19:34:50 UTC Fri Jun 26 2015
!
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service compress-config
!
hostname iosvl2-3
!
boot-start-marker
boot-end-marker
!
!
enable password cisco
!
no aaa new-model
!
!
!
!
!
!
!
!
no ip domain-lookup
ip cef
no ipv6 cef
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
vlan internal allocation policy ascending
!
! 
!
!
!
!
!
!
!
!
!
!
!
interface Loopback0
 description Loopback
 no ip address
!
interface GigabitEthernet0/0
 description Mapped to Vlan1 for management
 switchport mode access
 media-type rj45
 negotiation auto
!
interface GigabitEthernet0/1
 description to iosvl2-2
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
!
interface GigabitEthernet0/2
 description to iosvl2-1
 switchport trunk encapsulation dot1q
 switchport mode trunk
 media-type rj45
 negotiation auto
!
interface GigabitEthernet0/3
 description to iosv-1
 switchport access vlan 2
 switchport mode access
 media-type rj45
 negotiation auto
!
interface Vlan1
 description OOB Management
 ip address 10.255.0.250 255.255.0.0
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
!
control-plane
!
banner exec `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner incoming `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
banner login `
**************************************************************************
* IOSv is strictly limited to use for evaluation, demonstration and IOS  *
* education. IOSv is provided as-is and is not supported by Cisco's      *
* Technical Advisory Center. Any use or disclosure, in whole or in part, *
* of the IOSv Software or Documentation to any third party for any       *
* purposes is expressly prohibited except as otherwise authorized by     *
* Cisco in writing.                                                      *
**************************************************************************`
!
line con 0
 password cisco
line aux 0
line vty 0 4
 exec-timeout 720 0
 password cisco
 login
 transport input telnet ssh
!
!
end</entry>
            <entry key="AutoNetkit.mgmt_ip" type="string"></entry>
        </extensions>
        <interface id="0" name="GigabitEthernet0/1"/>
        <interface id="1" name="GigabitEthernet0/2"/>
        <interface id="2" name="GigabitEthernet0/3"/>
    </node>
    <node name="server-1" type="SIMPLE" subtype="server" location="251,336">
        <extensions>
            <entry key="config" type="String">#cloud-config&#xD;
bootcmd:&#xD;
- ln -s -t /etc/rc.d /etc/rc.local&#xD;
hostname: server-1&#xD;
manage_etc_hosts: true&#xD;
runcmd:&#xD;
- start ttyS0&#xD;
- systemctl start getty@ttyS0.service&#xD;
- systemctl start rc-local&#xD;
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config&#xD;
- echo "UseDNS no" &gt;&gt; /etc/ssh/sshd_config&#xD;
- service ssh restart&#xD;
- service sshd restart&#xD;
users:&#xD;
- default&#xD;
- gecos: User configured by VIRL Configuration Engine 0.15.8&#xD;
  lock-passwd: false&#xD;
  name: cisco&#xD;
  plain-text-passwd: cisco&#xD;
  shell: /bin/bash&#xD;
  ssh-authorized-keys:&#xD;
  - VIRL-USER-SSH-PUBLIC-KEY&#xD;
  sudo: ALL=(ALL) ALL&#xD;
write_files:&#xD;
- path: /etc/init/ttyS0.conf&#xD;
  owner: root:root&#xD;
  content: |&#xD;
    # ttyS0 - getty&#xD;
    # This service maintains a getty on ttyS0 from the point the system is&#xD;
    # started until it is shut down again.&#xD;
    start on stopped rc or RUNLEVEL=[12345]&#xD;
    stop on runlevel [!12345]&#xD;
    respawn&#xD;
    exec /sbin/getty -L 115200 ttyS0 vt102&#xD;
  permissions: '0644'&#xD;
- path: /etc/systemd/system/dhclient@.service&#xD;
  content: |&#xD;
    [Unit]&#xD;
    Description=Run dhclient on %i interface&#xD;
    After=network.target&#xD;
    [Service]&#xD;
    Type=oneshot&#xD;
    ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease&#xD;
    RemainAfterExit=yes&#xD;
  owner: root:root&#xD;
  permissions: '0644'&#xD;
- path: /etc/rc.local&#xD;
  owner: root:root&#xD;
  permissions: '0755'&#xD;
  content: |-&#xD;
    #!/bin/sh -e&#xD;
    ifconfig eth1 up 10.0.0.2 netmask 255.255.0.0&#xD;
    route add -net 10.0.0.0/16 gw 10.0.0.1 dev eth1&#xD;
    route add -net 192.168.0.0/29 gw 10.0.0.1 dev eth1&#xD;
    route del default&#xD;
    route add default gw 10.0.0.1&#xD;
    route del -net 10.0.0.0 netmask 255.255.0.0 gw 10.0.0.1&#xD;
    exit 0&#xD;
</entry>
        </extensions>
        <interface id="0" name="eth1" ipv4="10.0.0.2" netPrefixLenV4="16"/>
    </node>
    <node name="server-2" type="SIMPLE" subtype="server" location="517,336">
        <extensions>
            <entry key="config" type="String">#cloud-config&#xD;
bootcmd:&#xD;
- ln -s -t /etc/rc.d /etc/rc.local&#xD;
hostname: server-2&#xD;
manage_etc_hosts: true&#xD;
runcmd:&#xD;
- start ttyS0&#xD;
- systemctl start getty@ttyS0.service&#xD;
- systemctl start rc-local&#xD;
- sed -i '/^\s*PasswordAuthentication\s\+no/d' /etc/ssh/sshd_config&#xD;
- echo "UseDNS no" &gt;&gt; /etc/ssh/sshd_config&#xD;
- service ssh restart&#xD;
- service sshd restart&#xD;
users:&#xD;
- default&#xD;
- gecos: User configured by VIRL Configuration Engine 0.15.8&#xD;
  lock-passwd: false&#xD;
  name: cisco&#xD;
  plain-text-passwd: cisco&#xD;
  shell: /bin/bash&#xD;
  ssh-authorized-keys:&#xD;
  - VIRL-USER-SSH-PUBLIC-KEY&#xD;
  sudo: ALL=(ALL) ALL&#xD;
write_files:&#xD;
- path: /etc/init/ttyS0.conf&#xD;
  owner: root:root&#xD;
  content: |&#xD;
    # ttyS0 - getty&#xD;
    # This service maintains a getty on ttyS0 from the point the system is&#xD;
    # started until it is shut down again.&#xD;
    start on stopped rc or RUNLEVEL=[12345]&#xD;
    stop on runlevel [!12345]&#xD;
    respawn&#xD;
    exec /sbin/getty -L 115200 ttyS0 vt102&#xD;
  permissions: '0644'&#xD;
- path: /etc/systemd/system/dhclient@.service&#xD;
  content: |&#xD;
    [Unit]&#xD;
    Description=Run dhclient on %i interface&#xD;
    After=network.target&#xD;
    [Service]&#xD;
    Type=oneshot&#xD;
    ExecStart=/sbin/dhclient %i -pf /var/run/dhclient.%i.pid -lf /var/lib/dhclient/dhclient.%i.lease&#xD;
    RemainAfterExit=yes&#xD;
  owner: root:root&#xD;
  permissions: '0644'&#xD;
- path: /etc/rc.local&#xD;
  owner: root:root&#xD;
  permissions: '0755'&#xD;
  content: |-&#xD;
    #!/bin/sh -e&#xD;
    ifconfig eth1 up 10.0.0.3 netmask 255.255.0.0&#xD;
    route add -net 10.0.0.0/16 gw 10.0.0.1 dev eth1&#xD;
    route add -net 192.168.0.0/29 gw 10.0.0.1 dev eth1&#xD;
    route del default&#xD;
    route add default gw 10.0.0.1&#xD;
    route del -net 10.0.0.0 netmask 255.255.0.0 gw 10.0.0.1&#xD;
    exit 0&#xD;
</entry>
        </extensions>
        <interface id="0" name="eth1" ipv4="10.0.0.3" netPrefixLenV4="16"/>
    </node>
    <connection dst="/virl:topology/virl:node[5]/virl:interface[1]" src="/virl:topology/virl:node[4]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[3]/virl:interface[1]" src="/virl:topology/virl:node[5]/virl:interface[2]"/>
    <connection dst="/virl:topology/virl:node[2]/virl:interface[1]" src="/virl:topology/virl:node[5]/virl:interface[3]"/>
    <connection dst="/virl:topology/virl:node[1]/virl:interface[1]" src="/virl:topology/virl:node[2]/virl:interface[2]"/>
    <connection dst="/virl:topology/virl:node[3]/virl:interface[2]" src="/virl:topology/virl:node[6]/virl:interface[1]"/>
    <connection dst="/virl:topology/virl:node[7]/virl:interface[1]" src="/virl:topology/virl:node[4]/virl:interface[2]"/>
</topology>